[TRNSYS-users] PID controller and time schedule

fanfan fanfan fanfan.fanyunqing at gmail.com
Sun Sep 25 18:32:17 PDT 2011


Dear trnsys users,

I am try to use a PID Controller to modulate the indoor co2 concentration.
According to input signal there will be easy to output the control signal
from the PID controller, however, co2 source concentration must
be varied base on working time schedule. How to input this proportion figure
between the number of people and 24 hours by using trnsys tpye? For TRNbuild
module, seems impossible to output value directly from schedule setting,
therefore, I try to use type 14 to add the number of each hour.
Unfortunately, it is difficult to integrate those type14 to form a time
figure.
Is there anyone have a experience on co2 base demand control, please give me
some suggestions.


Thank you very much.

Best regards

fanfan

IGSES, Kyushu University Japan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110926/1f7d6721/attachment-0001.htm>


More information about the TRNSYS-users mailing list