[TRNSYS-users] Adding door TRNSYS 3d

[Karol Bandurski]

Nidal and David,

 

I'm not sure if I understand problem, but I have just create single-family
house and I modeled only exterior door.

 

I defined this door as window and create this door using WINDOW 6 (software
of Lawrence Berkeley National Laboratory - free download): u-value=2.6
W/m^2K and g-value=0.144

 

It seems to me that interior door are also possible to define this way.

 

It seems to me that in Google SketchUp edge of window/door can't overlap
with edge of wall. To respect this you can make door which begin a few
centimeters above lower edge of wall

 

I'm beginner in TRNSYS, so I'm not sure if my ideas are well!!!

 

I enclose pdf  with instruction how to create window in WINDOW and introduce
it to TRNBuild library.

 

Good luck

------------------------------------------------

Karol Bandurski MSc.

 <http://www.ee.put.poznan.pl/> Institute of Environmental Engineering

Poznan University of Technology

 <http://www.ee.put.poznan.pl/> www.ee.put.poznan.pl

www.put.poznan.pl <http://www.put.poznan.pl/> 

 

 

 

 

From: David BRADLEY [mailto:d.bradley at tess-inc.com] 
Sent: Monday, October 17, 2011 6:34 PM
To: Nidal Abdalla
Cc: TRNSYS-users
Subject: Re: [TRNSYS-users] Adding door TRNSYS 3d

 

Nidal,
  This is a bit of a problem in the Trnsys3D plugin; the developers are
working on a solution. I have had some success in breaking my wall up into a
"wall" part and a "door" part but this can be tricky because you don't want
the door to get recognized as a window. I then set the two parts as
different wall types and take care of correcting the construction in
TRNBuild. 
  If there are not very many doors in your zone, I would recommend that you
just ignore them. I only took them into account because I was simulating a
garage that had well insulated wall and completely uninsulated (very large)
garage doors.
Best,
 David


On 10/17/2011 05:55, Nidal Abdalla wrote: 

Dear All

I am working with multi-zone building using TRNbuild, and I wonder if you
can help me how I can add or identify a DOOR to the one zone building.

Also I could'nt add or identify a door by using Trnsys3D. 

 

Best Regards

Nidal Abdalla






_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users





-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA
 
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com
 
http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111018/19b88042/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: windowtutorial.pdf
Type: application/pdf
Size: 211799 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111018/19b88042/attachment-0001.pdf>