[TRNSYS-users] Adding door TRNSYS 3d

[David BRADLEY]

Nidal,
   This is a bit of a problem in the Trnsys3D plugin; the developers are 
working on a solution. I have had some success in breaking my wall up 
into a "wall" part and a "door" part but this can be tricky because you 
don't want the door to get recognized as a window. I then set the two 
parts as different wall types and take care of correcting the 
construction in TRNBuild.
   If there are not very many doors in your zone, I would recommend that 
you just ignore them. I only took them into account because I was 
simulating a garage that had well insulated wall and completely 
uninsulated (very large) garage doors.
Best,
  David


On 10/17/2011 05:55, Nidal Abdalla wrote:
> Dear All
> I am working with multi-zone building using TRNbuild, and I wonder if 
> you can help me how I can add or identify a DOOR to the one zone building.
> Also I could'nt add or identify a door by using Trnsys3D.
> Best Regards
> Nidal Abdalla
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111017/83a21ac6/attachment-0001.htm>