[TRNSYS-users] Simulation of false ceiling: influence on inertia

[David BRADLEY]

Joke,
  I like to simulate this situation as two thermal zones; the 
conditioned zone below and the plenum zone above. Because the suspended 
ceiling basically has no mass to it, I simulate it as a wall made up of 
a single purely resistive (ie massless) layer.
best,
  Davod


On 10/14/2011 03:44, Joke De Beuckelaer wrote:
>
> Dear all,
>
> Can anyone help me what's the best way to simulate a suspended false 
> ceiling?
>
> The goal is to simulate a class room where the comfort is assured by 
> using night ventilation. However for acoustic reasons we need a false 
> ceiling.
>
> I want to know the percentage of suspended false ceiling is possible 
> in order to have still enough inertia from the concrete ceiling.
>
> Is the best way just to define two different types of ceiling (1. A 
> concrete ceiling and 2.a false ceiling (concrete + air layer + false 
> ceiling)) or has anyone another idea?
>
> Is it possible to draw for example some obstructions in Google sketch 
> up and then to define 3 air nodes in trnsys. One air node above the 
> suspended false ceiling; one air node in the middle of the room and 
> one air node representing the opening window?
>
> Will it take into account the less availability of the inertia of the 
> concrete ceiling?
>
> Hoping for an answer,
>
> Joke De Beuckelaer
>
> project engineer mep
>
> VK *HEALTHCARE*| *BUILDINGS*|*INDUSTRY*| *INFRA*
>
> *Value by design*
>
> VK ENGINEERING  Avenue Clemenceaulaan 87, 1070 Bruxelles Brussel, Belgium
> *t*   +32 2 414 07 77 *f*  +32 2 414 04 98 *m*  +32 473 97 01 50 *e*   
> joke.d at vkgroup.be *w *www.vkgroup.be
>
> * ALWAYS LOOKING FOR GREAT PEOPLE *****
>
> ****DISCLAIMER****
> This communication is confidential and for the sole useof the 
> addressee. If you are not the intended recipient,
> please immediately notify the sender by e-mail at the address shown 
> and then delete it from your system
> without copying, disclosing or forwarding its contents. Thank you.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111017/3da5ffa5/attachment-0001.htm>