[TRNSYS-users] regarding the problem of using type 194 without inverter

David BRADLEY d.bradley at tess-inc.com
Fri Oct 14 09:36:00 PDT 2011


Guang Yu,
   please send the Simulation Studio project file (*.tpf) that you are 
running.
Kind regards,
  David


On 10/13/2011 23:02, Guang Yu Jin wrote:
>
> Dear TRNSYS users,
>
> I encounter some problem when using type 194 (PV model). I configure 
> the parameter of
>
> Vmaxp = 42
>
> I maxp = 5.16
>
> So the max power at the reference condition (25C, 1000W/m^2) is 
> 42*5.16 =216 W
>
> But the output of the type 194, for 1 pc of PV module, the  "Power at 
> Mzximum Power Point" goes to 1000W+. That is impossible
>
> Is any users can teach me where the problem is?
>
> Thanks & Best Regards,
>
> GY
>
> ----------------------------------------------------------
>
> _Jin_ Guang Yu
>
> Network Team
>
> DID: +65-6550 5386
>
> email: GuangYu.Jin at sg.panasonic.com <mailto:GuangYu.Jin at sg.panasonic.com>
>
> ----------------------------------------------------------
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111014/7f663845/attachment-0001.htm>


More information about the TRNSYS-users mailing list