[TRNSYS-users] TRNSYS17 rebuilding and external dll problem

[Yoshinaga Mika]

Dear all,

I'm facing a difficult problem. A non-standard-type.dll (Type344 from TRNSSOLAR) can't be worked on Simulation Studio after rebuilding TRNDll.dll by CVF6.6b. 
Before rebuilding, Type344 had run successfully. Then I just have opened \TRNSYS17\Compilers\Cvf66\Cvf66.dsw by CVF6.6b and Selected "Build->Rebuild All" and rebuild have done without any error.
After rebuilding, all projects using standard types and non-standard TESS Types could simulate well but a project file including Type344 was ended with the following error message.

-TRNSYS Message 105 : A TYPE was called in the TRNSYS input file but was either not linked into trndll.dll or was not found in an external dll. A dummy subroutine was called in its place. Please link the TYPE or remove it from the input file
-Reported information  :  Type344 could not be located in either the trndll.dll or in an external dll. Please relink theTRNDll.dll including this Type or make sure that an external DLL in the \UserLib\DebugDLLs and \UserLib\ReleaseDLLs folders contain the Type.

Type344.dll is surely placed in \Trnsys17\UserLib\ReleaseDLLs!! TRNSYS17 has been upgraded to the latest version just to be safe. 

I was wondering if you could give me a few tips to clear it up. Thank you in advance.

Best regards,
Mika

Mika Yoshinaga
Meijo university, Japan