[TRNSYS-users] GEOSURF

[Matt Duffy]

 Dear Kamyar Nasrollahi,First, I would recommend simply leaving that value as the default, 0, as this will take the average area weighted of the incoming radiation into the zone. If you really want have more detail for this analysis, you may specifiy the fraction of the incoming radiation for that surface. All of these fractions have to add up to 1.Best regards,Matt Duffy  Best regards,   Matt Duffy  Project Engineer, TRNSYS Coordinator Thermal Energy System Specialists  22 N Carroll, Suite 370  Madison, WI  53703  608.274.2577  duffy at tess-inc.com    ----- Original Message -----From: "Kamiar Nasrollahi" >;dezaki1979 at yahoo.com 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110302/9be636e3/attachment-0001.htm>