[TRNSYS-users] how to creat the basement and define the concrete position of the heatings in the zone using TRNSYS3d

王洋 wanghongyang1767 at gmail.com
Wed Jun 1 06:37:33 PDT 2011


Dear all,

       Who has the relative experience as follows please give me some
advices:


       How to creat the basement using TRNSYS3d ? And how to define the
concrete position of the heatings in the zone using TRNSYS3d?

        Many thanks!

       Br.

      wang



在 2011年5月30日 下午5:27,王洋 <wanghongyang1767 at gmail.com>写道:

>
>
> 2011/5/27 <trnsys-users-request at cae.wisc.edu>
>
>> Send TRNSYS-users mailing list submissions to
>>        trnsys-users at cae.wisc.edu
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
>> or, via email, send a message with subject or body 'help' to
>>        trnsys-users-request at cae.wisc.edu
>>
>> You can reach the person managing the list at
>>        trnsys-users-owner at cae.wisc.edu
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>>
>> Today's Topics:
>>
>>   1. Re: Rotary Heat Exchanger (Matt Duffy)
>>   2. Re: Rotary Heat Exchanger (Matt Duffy)
>>   3. SDHW template Tin and Useful energy gain- strange behaviour
>>      (Philip Horn)
>>   4. Unable to create new weekly schedule (Alexandros Pantazaras)
>>
>>
>> ---------- 已转发邮件 ----------
>> From: "Matt Duffy" <duffy at tess-inc.com>
>> To: "Santiago Naranjo Palacio" <sn377 at cornell.edu>,
>> trnsys-users at engr.wisc.edu
>> Date: Thu, 26 May 2011 13:45:24 -0500 (CDT)
>> Subject: Re: [TRNSYS-users] Rotary Heat Exchanger
>>
>> Dear Santiago,
>>
>> There is not a rotary heat exchanger in the TRNSYS Standard Library. The
>> TESS HVAC Library has a rotary desicant dehumidifier, but no rotary heat
>> exchanger.
>>
>> Best regards,
>>
>> Matt Duffy
>>
>> *----- Original Message -----*
>> *From:* "Santiago Naranjo Palacio" <sn377 at cornell.edu>
>> *Sent:* Tue, May 24, 2011 10:41
>> *Subject:* [TRNSYS-users] Rotary Heat Exchanger
>>
>>    TRNSYS users,
>>
>> I was wondering if there is a standard type that helps model a 'Rotary
>> Heat Exchanger' or anything similar.
>>
>> Thanks!
>>
>> --
>> Santiago Naranjo Palacio, Ph.D. Candidate
>> Cornell University, New York
>>
>>
>> ------------------------------
>>
>> _______________________________________________
>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>>
>> ---------- 已转发邮件 ----------
>> From: "Matt Duffy" <duffy at tess-inc.com>
>> To: duffy at tess-inc.com, sn377 at cornell.edu, trnsys-users at engr.wisc.edu
>> Date: Thu, 26 May 2011 14:07:21 -0500 (CDT)
>> Subject: Re: [TRNSYS-users] Rotary Heat Exchanger
>>
>> Santiago,
>>
>> I apologize; I stand corrected!
>>
>> The TESS HVAC Libraries have Type667 and Type760 to model Air-to-Air Heat
>> Recovery. You may view the descriptions at the following PDF.
>> http://www.trnsys.com/TESSLibs17_General_Descriptions.pdf
>>
>> Please feel free to contact me if you have any other questions.
>>
>>
>> Best regards,
>>
>> Matt Duffy
>>
>>
>>
>> *----- Original Message -----*
>> *From:* "Matt Duffy" <duffy at tess-inc.com>
>> *Sent:* Thu, May 26, 2011 13:45
>> *Subject:* Re: [TRNSYS-users] Rotary Heat Exchanger
>>
>>
>> Dear Santiago,
>>
>> There is not a rotary heat exchanger in the TRNSYS Standard Library. The
>> TESS HVAC Library has a rotary desicant dehumidifier, but no rotary heat
>> exchanger.
>>
>> Best regards,
>>
>> Matt Duffy
>>
>> *----- Original Message -----*
>> *From:* "Santiago Naranjo Palacio" <sn377 at cornell.edu>
>> *Sent:* Tue, May 24, 2011 10:41
>> *Subject:* [TRNSYS-users] Rotary Heat Exchanger
>>
>>    TRNSYS users,
>>
>> I was wondering if there is a standard type that helps model a 'Rotary
>> Heat Exchanger' or anything similar.
>>
>> Thanks!
>>
>> --
>> Santiago ! Naranjo Palacio, Ph.D. Candidate
>> Cornell University, New York
>>
>>
>> ------------------------------
>>
>> _______________________________________________
>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.edu <https://webmail.fusemail.com/webmail.php#>https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>> ------------------------------
>>
>> _______________________________________________
>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>>
>> ---------- 已转发邮件 ----------
>> From: Philip Horn <phorn at fraunhofer.org>
>> To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
>> Date: Thu, 26 May 2011 16:14:38 -0400
>> Subject: [TRNSYS-users] SDHW template Tin and Useful energy gain- strange
>> behaviour
>> Hi All,
>>
>> I played around a little bit with different efficiency equations for the
>> collector, and wanted to compare the results.
>> Therefore I used the SDHW template (with TYPE1 as collector), which uses
>> the outlet of the Tank as inlet temp to the collector.
>> I erased this connection and set the inlet temp to a fixed 10 deg but in
>> fact is it still varying when I plot it (from 10-13deg).
>> How come?
>>
>> Another thing that I experienced: when I used the system in the normal
>> mode (Tout tank connected to Tin collector), the useful energy gain of the
>> collector is higher than with a fixed (and in average 10 deg K lower) input
>> temperature.
>>
>> Shouldn't it be the opposite?
>> As Q=m*cp*(Tout-Tin) , the smaller Tin, the higher Quse (assuming that
>> Tout is not that heavily affected)?
>>
>> Clarification highly appreciated!!
>>
>> Best,
>> Philip
>>
>>
>>
>> ---------- 已转发邮件 ----------
>> From: Alexandros Pantazaras <apantazaras at gmail.com>
>> To: trnsys-users at cae.wisc.edu
>> Date: Fri, 27 May 2011 13:58:10 +0300
>> Subject: [TRNSYS-users] Unable to create new weekly schedule
>> Dear users,
>>
>> I have TRNSYS version 16.00.0036 (TRNBuild version 1.0.76). While working
>> in TRNBuild, I was attempting to create a new daily and weekly schedule to
>> use in artificial lighting, since none of the existing schedules were of use
>> to me. However, it is not possible to do such a thing, since in the new
>> schedule window, I am unable to switch between daily and weekly schedule.
>> The relevant radio button is set to "daily" and is greyed out, I can't
>> change the selection. I can create a daily schedule without problem, but it
>> is useless to me since I cannot determine when it is implemented during a
>> week. Anyone else has this problem? Any solutions/suggestions?
>>
>> Regards,
>>
>> Alexandros
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110601/a96a7e2f/attachment-0005.htm>


More information about the TRNSYS-users mailing list