[TRNSYS-users] Problem modifying *_b17.idf file
Rebecca Ward
rmw61 at cam.ac.uk
Tue Jun 14 05:33:59 PDT 2011
Hi,
I spotted an error in my model, (missing a window), and am trying to read it
back into SketchUp to correct it. What's happening, though, is that when I
update the *.idf file and then open it using the TRNSYS plug-in (SketchUp
8), I get the following error:
Sorry...the plugin has encountered an error. This error may cause
unpredictable behavior in the plugin--continue this session with caution!
It would probably be a good idea to exit SketchUp and start again.
For help, please contact the TRNSYS newsgroup by
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users .
When reporting a bug, please include the error message and backtrace below
(scroll down):
ERROR:
ArgumentError
At least three points needed to fit a plane
BACKTRACE:
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/sketchup/Geom.rb:335:in `fit_plane_to_points'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/sketchup/Geom.rb:335:in `plane'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/sketchup/Geom.rb:301:in `normal'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/sketchup/Geom.rb:453:in `normal'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/SubSurface.rb:97:in `check_input_object'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/DrawingInterface.rb:75:in `draw_entity'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:205:in `update_model'
(eval):0:in `each_with_index'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:201:in `each'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:201:in `each_with_index'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:201:in `update_model'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/interfaces/ModelInterface.rb:118:in `draw_model'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/ModelManager.rb:183:in `open_input_file'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/CommandManager.rb:71:in `open_input_file'
C:/Program Files (x86)/Google/Google SketchUp
8/Plugins/Trnsys3d/lib/MenuManager.rb:83:in `create_commands'
If I carry on anyway, even if I activate a zone, I cannot generate any
recogniseable components in the zone.
How can I correct the errors in my model?
Thanks,
Rebecca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110614/ae7c54e2/attachment-0001.htm>
More information about the TRNSYS-users
mailing list