[TRNSYS-users] Need in monitoring the temperature in type 56 model

[Rakesh Kaushik]

Dear trnsys user,

I created a type-56 3D model for a zone, and I introduced the type 108
thermostat to monitor the temperature in the zone with the help of fan,
furnace and auxiliary cooling unit, and I need little help to figure what I
am doing wrong I attached my model with this email.

Thank you very much in advance

Regards,
*Rakesh Kaushik*
Graduate Student
Department of Mechanical Engineering
University of Dayton
rakeshkaushik25 at gmail.com
Cell: 937-239-5924
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110726/b65d38de/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Untitled_imported.dck
Type: application/octet-stream
Size: 10927 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110726/b65d38de/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Untitled_imported.tpf
Type: application/octet-stream
Size: 164666 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110726/b65d38de/attachment-0011.obj>