[TRNSYS-users] TYPE 109 in tracking mode

[David BRADLEY]

Ricardo,
   I would guess that in tracking mode, the slope and azimuth become the 
slope and azimuth of the axis instead of the slope and azimuth of the 
surface. This does not hold true for the "vertical axis tracking" case 
in which the slope and azimuth are irrelevant.

   I would also suggest that if you are using TRNSYS 17 or even a late 
release of Trnsys16 use Type15 instead of Type109. A number of issues 
were identified with Type109 and our strong recommendation is that you 
use Type15 instead. Type109 is considered obsolete in Trnsys17.
Kind regards,
  David


On 7/1/2011 00:03, Ricardo Gallegos wrote:
> Hi everybody.
> I am trying to use type 109 in tracking mode, but i do not know what 
> values to input for the azimuth and tilt  of the surface. The  "more" 
> tab  says "refer to the abstract " as to what values to put, but  I do 
> not know what abstract they refer, and the manuals don' t say anything 
> on this.
> can anybody please help me?
> Thank you in advance.
> Ricardo Gallegos
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110701/2b1cefc1/attachment-0005.htm>