[TRNSYS-users] If it is ok to use the string type variable for input

[keilholz, werner]

Lei, 

I use this regularly, it should work. You could check 2 things:
1. Use equation solver 0 (Global cards parameter 7 = 0)
2. Be sure to use the latest TRNSYS version; there was a version where this did not work indeed, but I just tried with the latest update and it works OK.

Werner

-----Message d'origine-----
De : trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] De la part de a8304506 at graduate.hku.hk
Envoyé : mercredi 26 janvier 2011 01:40
À : Lei Wang
Cc : trnsys-users at cae.wisc.edu
Objet : Re: [TRNSYS-users] If it is ok to use the string type variable for input

Hello, Lei.

I have tried before, but it seems that the input values are correctly assigned
only at the start of the simulation.  Afterwards, the input values remain
unchanged.

Best Regards
LEE, Chun Kwong
City University of Hong Kong

Quoting Lei Wang <leiwang at tees.tamus.edu>:

> Hi,
> 
> I know that it is fine to use the string type variable for parameter input.
>  But I'm not sure if it is ok to use the string variable for input variable.
> The string variable had been defined in equation and its value will change
> during the simulation. Since there are too many components need to connected
> with the equation, if I use the line to connect all these components, the
> model will look very complex. 
> 
> Thanks
> 
> Lei
> 
> 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
> 




_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users