[TRNSYS-users] If it is ok to use the string type variable for input
a8304506 at graduate.hku.hk
a8304506 at graduate.hku.hk
Tue Jan 25 16:39:59 PST 2011
Hello, Lei.
I have tried before, but it seems that the input values are correctly assigned
only at the start of the simulation. Afterwards, the input values remain
unchanged.
Best Regards
LEE, Chun Kwong
City University of Hong Kong
Quoting Lei Wang <leiwang at tees.tamus.edu>:
> Hi,
>
> I know that it is fine to use the string type variable for parameter input.
> But I'm not sure if it is ok to use the string variable for input variable.
> The string variable had been defined in equation and its value will change
> during the simulation. Since there are too many components need to connected
> with the equation, if I use the line to connect all these components, the
> model will look very complex.
>
> Thanks
>
> Lei
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
More information about the TRNSYS-users
mailing list