[TRNSYS-users] window pane temperature diverging

[Simon Binnemans]

Thomas,

I have been having the same problem as you. I worked with the TRNSYS 3d 
plugin from sketchup, and the problem was that in one window I had 
drawn a line too much.
A way to find the error in your drawing is to delete a few zone's and 
see if the error stil occurs.


-- 
Simon Binnemans
Onderzoeksmedewerker Kenniscentrum Energie
KHK
Kleinhoefstraat 4
2440 GEEL
T: +32(0)14 56 23 10
F: +32(0)14 58 48 59
http://www.khk.be


Citeren Thomas Bockelandt <thomasb at boydens.be>:

> Dear all,
>
> I am currently simulating an office building in trnsys but i keep 
> getting the following error:
>
> *** Warning at time       :        56.000000
>    Generated by Unit     :    88
>    Generated by Type     :    56
>    Message               : Zone   6 surface  141 pane temperature 
> calculation is diverging at time     56.00000TDIF:              
> 3.55469 ITPANE:   31 ITCALC:    1
>
> And this for all windows in my b17-file,giving me a fatal error.
> I checked the links with my weather data reader (meteonorm) multiple 
> times and have even changed the type of data reader entirely but the 
> warnings/error remains, always after 56 hours.
>
> I never had this error before, while I used the data reader-type 56 
> configuration numerous times before.
> Does anyone know where this error might come from?
>
> Best regards,
>
> Thomas Bockelandt
>
>
>