[TRNSYS-users] TRNSYS Message 350

[David BRADLEY]

Cory,
   By chance do you have multiple components that point to the same 
file? With the old Fortran compiler (Compaq) it was okay to do that but 
with the newer one (Intel) it isn't. You need to make a copy of the file 
so that only one component points to each file.
Kind regards,
  David


On 1/25/2011 19:05, Cory Duggin wrote:
> I am getting the following error in my simulation:
> "Unable to open the file associated with an ASSIGNED logical unit 
> number. Please check the ASSIGN statement and make sure that the file 
> exists at the specified location"
> I have tried browsing the relocate each of the external files for 
> their respective types, but they are all where they should be and open 
> fine.  What else should I do?  I have a similar simulation that uses 
> all the same files, and it has no problems reading the files.  I am 
> going to attach my .lst file.  Thanks.
>
> -- 
> Cory Duggin, EI
> Tennessee Tech University
> Graduate Research Assistant
> Mechanical Engineering
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110126/d182a694/attachment-0001.htm>