[TRNSYS-users] Simulation errors

[Cory Duggin]

I am having two issues when trying to get my simulation to run.  First, it
says there is a divide by zero in one of my equations.  I have determined
that a mass flow rate that is being used in the equation is not being set to
a value.  I checked the preceding blocks and they say the flow rate should
be 100kg/hr.  The previous block is a mixer piece and within the block it
says the outlet mass flow rate is 100, but when I check the actual path
connection value it says 0. Why would that mass flow rate value not be
passed?

Also, I am getting an error that says "the  user has specified LABELS for
a component model where they are not allowed. Error 39."  How do I track
down what is causing this error?  Thanks

-- 
Cory Duggin, EI
Tennessee Tech University
Graduate Research Assistant
Mechanical Engineering
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110116/4d1528a4/attachment-0001.htm>