[TRNSYS-users] FW: solar process heating simple system

[Shahrdad JavidRad]

ups... attached!

-----------------------------------







Hello everybody,

For my thesis in the field of solar process heating I need to work with TRNSYS but I am beginner :(
I am going to design a solar system (attached file) without storage and heat exchanger:

With wich standard components can I reach the below condition?

- The outlet temperature of the collector field is controlled by adapting the mass flow
in a range between 15% and the maximum of the mass flow. Below an irradiation
of 200 W/m² the mass flow set to zero. The heat removal of the process is
considered in a way that temperature is reset to Tset - 10 K. The delivered solar
heat only contributes to the yield if the temperature raise at the process interface is
more than 8 K. Otherwise the collector field runs in short circuit.

Thanks
regards Javid

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110113/d2cde5ca/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Sache der Auslegung.pdf
Type: application/pdf
Size: 92092 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110113/d2cde5ca/attachment-0001.pdf>