[TRNSYS-users] Collectors in Series

[Matt Duffy]

Dear Fernando,

Thank you for bringing this to our attention, I will look into this. In
the mean time, if you have Type539 of the TESS Solar Library, that should
work just fine.

Best regards,

Matt Duffy


----- Original Message -----
From: "Sancho,Fernando" <fernando.sancho at sonnenwaermeag.de>
Sent: Wed, February 2, 2011 5:53
Subject:[TRNSYS-users] Collectors in Series


Hello Trnsys-Community;
I'm quite new to Trnsys and untill now have made just one collector
simulations, but
in any case I'm a bit embarrased
about this problem that should be  quite simple.
I just don't find any difference in my results when I change the collector
field
configuration (and keeping the same total area)
The results in thermal gain and maximun temperature value are the same
when I change
the number of collector in a serie, (Parameter 1 in Type 1 and 72). And
I'm testing
it in the most simple installation, water comes at 10°and just go..,
without any
storage.

What do I forget?

Thanks a lot!




Mit freundlichen Grüßen


Fernando Sancho Márquez


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users


----- End of original message -----