[TRNSYS-users] Active layer dividing

[王洋]

Dear all,

I defined a active layer, but it shows ERROR as follows:




 Fatal Error at time   :         0.350000
    Generated by Unit     :     4
    Generated by Type     :    56
    Message               : Specific fluid mass flow of active layer in
surface   7 below minimum value of 5.35 kg/m2h Please, increase the minimum
mass flow rate or use the autosegmentation feature of TRNBuild for
subdividing the surface.



But the min. allowed inlet mass flowrate is 5.37 kg/m2h, I defined the min.
desired inlet mass flowrate is 5.4 kg/m2h.
The ATTACHED is the detailed setting of ACTIVE LAYER SPECIFICATION. Please
have a look and tell me how to correctly define them?

Please tell me how to increase the minimum mass flow rate? Where is it in
detail? I want to get only one surface not dividing it. Please tell me how
to get only one segmentation in detail?


Many thanks!


Br.

wang

2011/1/31 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. Re: Using Equations with Initial Values (David BRADLEY)
>
>
> ---------- 已转发邮件 ----------
> From: David BRADLEY <d.bradley at tess-inc.com>
> To: "Aaron J. Danenberg" <danenberg at hartford.edu>
> Date: Mon, 31 Jan 2011 11:54:09 -0600
> Subject: Re: [TRNSYS-users] Using Equations with Initial Values
>  Aaron,
>   Type93 will do exactly that.
> Best,
>  David
>
>
> On 1/31/2011 11:42, Aaron J. Danenberg wrote:
>
>  In the simulation studio I am using the equation feature.  For the first
> time step, I need a variable in the equation to be some defined constant
> value, for the following time step I need that variable to be the output of
> another component of the previous time step.  Does anyone know how to do
> this?
>
>
>
> Aaron J. Danenberg
>
> University of Hartford
>
> Mechanical Engineering Graduate Student
>
> danenberg at hartford.edu
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110201/79e7f798/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1.doc
Type: application/msword
Size: 126464 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110201/79e7f798/attachment-0001.doc>