[TRNSYS-users] Specify Constants via Equations for Parameters

[Matt Duffy]

Dear Pei,Assuming that you are working in the Simulation Studio, the way to implement Parameters with Equations is to select from the drop-down menu of that particular component's proforma, 'String'. Then, after you have defined the string variable in an Equation, simply type in the exact string variable name in the appropriate parameter.Thus, no "linking" in the Studio is necessary for parameters. The example, "C:\Trnsys17\Examples\Parametric Runs\SDHW-ParametricRuns-Studio.tpf" should demonstrate this.Best regards,Matt Duffy----- Original Message -----From: "Pei Ru Chao" >;simplica1 at hotmail.com
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111207/b6ce08b6/attachment-0001.htm>