[TRNSYS-users] R How to open *.tpf and *.bui files of Trnsys 15 using trnsys 17

王洋 wanghongyang1767 at gmail.com
Thu Apr 28 03:03:14 PDT 2011


Dear Mr. Bradley,

               Many thanks! You're right. But when I open the TRNSYS 15's
*.tpf file using TRNSYS 17 studio, so many former informations lost, the
links' color became BLUE, please see the ATTACHED.

              What's more, the TRNBUILD cann't open the former TRNSYS 15's
*.bui file directly. It said, "cannot open BUI-File:(c:\trnsys
15\usr\Iwobay.bld)". Please see the 2nd ATTACHED. Please give me some
advices to open them completely and keep all the former contents in detail
using the TRNSYS 15/prebid/iisibat! I'm very eager to use those former
programs.

             My support said to me, try to adapt the syntax in the .dec file
to TRNSYS 17, but I tried, it still goes blank. Please see the 3rd ATTACHED.
How to adapt the syntax in the .dec file to TRNSYS 17?

        Thanks a lot!

        Br.

wang


2011/4/18 王洋 <wanghongyang1767 at gmail.com>

>
>
>
>
> 2011/4/15 David BRADLEY <d.bradley at tess-inc.com>
>
>>  Wang,
>>  I just tried and it looks as though File: Open works as expected. The
>> Trnsys17 Studio is used for opening *.tpf files; it will make its best
>> attempt at automatically updating certain simulation parameters that changed
>> between Trnsys15 and Trnsys16. TRNBuild is used for opening *.bui files; it
>> will ask you to redefine your window data as window data was stored in an
>> external file and not in the *.bui itself with Trnsys15.
>> David
>>
>>
>>
>> On 4/15/2011 03:18, � wrote:
>>
>> Dear all,
>>
>>
>> How to open *.tpf and *.bui files of Trnsys 15 using trnsys 17? Please
>> tell me the detailed steps!
>>
>> Thanks in advance!
>>
>> br.
>>
>> wang
>>
>> 2011/4/14 王洋 <wanghongyang1767 at gmail.com>
>>
>>>
>>>
>>> 2011/4/14 <trnsys-users-request at cae.wisc.edu>
>>>
>>>> Send TRNSYS-users mailing list submissions to
>>>>        trnsys-users at cae.wisc.edu
>>>>
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>> or, via email, send a message with subject or body 'help' to
>>>>        trnsys-users-request at cae.wisc.edu
>>>>
>>>> You can reach the person managing the list at
>>>>        trnsys-users-owner at cae.wisc.edu
>>>>
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of TRNSYS-users digest..."
>>>>
>>>> Today's Topics:
>>>>
>>>>   1. Re: time delay by means of type 93 (input value   recall)
>>>>      (David BRADLEY)
>>>>   2. Re: type 860 PCM Storage Units (David BRADLEY)
>>>>   3. Re: Ground Convection coefficient (David BRADLEY)
>>>>   4. Re: TRNSYS3D plugin question (Marion Hiller)
>>>>
>>>>
>>>> ---------- 已转发邮件 ----------
>>>> From: David BRADLEY <d.bradley at tess-inc.com>
>>>> To: Stefan Wachter <wachter at mail.hs-ulm.de>
>>>> Date: Wed, 13 Apr 2011 14:44:56 -0500
>>>> Subject: Re: [TRNSYS-users] time delay by means of type 93 (input value
>>>> recall)
>>>>  Stefan,
>>>>   Type93 simply holds onto a value for as many time steps as you ask it
>>>> to, then "releases" the value. The control ought to work the same regardless
>>>> of the system size. I am not sure what you mean by "continuous" controllers.
>>>> If you mean that there are some controllers that continuously modify a flow
>>>> rate in order to maintain an outlet temperature then a simple time delay
>>>> might cause some problems. You might look at some of the controllers
>>>> available in the TESS Controllers Library (for Trnsys17) as there are a
>>>> number of devices in there with minimum run times and start-delays.
>>>> Best,
>>>>  David
>>>>
>>>>
>>>> On 4/8/2011 04:05, Stefan Wachter wrote:
>>>>
>>>>  Hello everybody,
>>>>
>>>> I am new at trnsys-users.
>>>> Currently I`m modeling an already existing solar heating system (for hot
>>>> water).
>>>> In this system the loading pump is activated by a time delay of 4
>>>> minutes (after solar pump is launched).
>>>> I tried to model this as follows:
>>>>
>>>> - simulation time step: 2 minutes
>>>> - storage of the control signal of the solar pump over the last two time
>>>> steps by means of type 93 (input value recall)
>>>> - if the control signal of the solar pump is "1" in the stored two time
>>>> steps, then the loading pump is launched.
>>>>
>>>> It works (tried by a simple example deck) but does it also works in
>>>> context with a quite big deck (120 m² apertur area, 2 continuous
>>>> controllers)?
>>>> I`m concerned about that the small time step of 2 minutes could cause
>>>> problems (for example oscillations of the controllers).
>>>> Could this work or have someone of you another idea how i can solve this
>>>> problem?
>>>>
>>>> Thanks a lot.
>>>> Best regards.
>>>>
>>>> Stefan Wachter
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>>
>>>>
>>>> --
>>>> ***************************
>>>> David BRADLEY
>>>> Principal
>>>> Thermal Energy Systems Specialists, LLC
>>>> 22 North Carroll Street - suite 370
>>>> Madison, WI  53703 USA
>>>>
>>>> P:+1.608.274.2577
>>>> F:+1.608.278.1475d.bradley at tess-inc.com
>>>> http://www.tess-inc.comhttp://www.trnsys.com
>>>>
>>>>
>>>>
>>>> ---------- 已转发邮件 ----------
>>>> From: David BRADLEY <d.bradley at tess-inc.com>
>>>> To: Filippo Busato <busato at gest.unipd.it>
>>>> Date: Wed, 13 Apr 2011 14:11:52 -0500
>>>> Subject: Re: [TRNSYS-users] type 860 PCM Storage Units
>>>>  Filippo,
>>>>  I am not familiar with Type860. However, there is a PCM wall material
>>>> component available in the user-donated Type library (TRNLib).
>>>>
>>>> http://sel.me.wisc.edu/trnsys/trnlib/library16.htm
>>>>
>>>> best,
>>>>  David
>>>>
>>>>
>>>> On 4/13/2011 07:52, Filippo Busato wrote:
>>>>
>>>>  Hi everybody,
>>>>
>>>>                I found in the report “Simulation Models of PCM storage
>>>> units” (IEA Report C5 Subtask C) that a Type 860 has been developed by the
>>>> Institute HEIG-VD in Yverdon-les-Bains Switzerland, by Jacques Bony and
>>>> Stephane Citherlet.
>>>>
>>>>
>>>>
>>>> I would like to know if that type is distributed and whom could I
>>>> get/buy that from.
>>>>
>>>>
>>>>
>>>> Can anyone help?
>>>>
>>>>
>>>>
>>>> Thanks in advance
>>>>
>>>> Filippo Busato
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> Filippo Busato PhD
>>>>
>>>> ingegnere
>>>>
>>>>
>>>>
>>>> Università di Padova
>>>>
>>>> Dipartimento di Tecnica e Gestione dei sistemi industriali
>>>>
>>>> Str.lla S.Nicola 3 -36100 Vicenza (VI)
>>>>
>>>> tel. (+39) 0444 998846 - fax. (+39) 0444 998884
>>>>
>>>> email: busato at gest.unipd.it
>>>>
>>>> web: www.gest.unipd.it/~busato <http://www.gest.unipd.it/%7Ebusato>
>>>>
>>>> skype: foucault76
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>>
>>>> According to D. Lgs 196/2003 this e-mail and any file transmitted with
>>>> it are for the sole use of the intended recipient. If you are not the
>>>> intended recipient of this e- mail, please delete it without copying or
>>>> forwarding it to any other persons and notify us immediately by e-mail or by
>>>> telephone. We thank you in advance for your support.
>>>>
>>>>
>>>>
>>>> P.S. Only print this mail if necessary
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>>
>>>>
>>>> --
>>>> ***************************
>>>> David BRADLEY
>>>> Principal
>>>> Thermal Energy Systems Specialists, LLC
>>>> 22 North Carroll Street - suite 370
>>>> Madison, WI  53703 USA
>>>>
>>>> P:+1.608.274.2577
>>>> F:+1.608.278.1475d.bradley at tess-inc.com
>>>> http://www.tess-inc.comhttp://www.trnsys.com
>>>>
>>>>
>>>>
>>>> ---------- 已转发邮件 ----------
>>>> From: David BRADLEY <d.bradley at tess-inc.com>
>>>> To: pseudomino at gmx.com
>>>> Date: Wed, 13 Apr 2011 14:16:16 -0500
>>>> Subject: Re: [TRNSYS-users] Ground Convection coefficient
>>>>  As noted in TRNBuild (where you set the back side convection
>>>> coefficient), a value smaller than 0.001 is used to indicate direct contact
>>>> between a BOUNDARY wall and a temperature. A large value (such as 999) is
>>>> used with other wall categories (ADJACENT, EXTERNAL, etc.) to indicate good
>>>> thermal contact.
>>>> Best,
>>>>  David
>>>>
>>>>
>>>> On 4/13/2011 10:30, pseudomino at gmx.com wrote:
>>>>
>>>> Hello,
>>>>
>>>> Usually, when using the assistant to create a multizone building, the
>>>> convection coefficient between the soil and the floor is set to 999 to
>>>> reproduce the absence of thermal resistance.
>>>>
>>>> But when I create a file using the Trnsys3D import from Sketchup, this
>>>> same coefficient is set by default to 0,001.
>>>> Why is that ?
>>>>
>>>> Please help me understand
>>>>
>>>>
>>>> _______________________________________________
>>>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>>
>>>>
>>>> --
>>>> ***************************
>>>> David BRADLEY
>>>> Principal
>>>> Thermal Energy Systems Specialists, LLC
>>>> 22 North Carroll Street - suite 370
>>>> Madison, WI  53703 USA
>>>>
>>>> P:+1.608.274.2577
>>>> F:+1.608.278.1475d.bradley at tess-inc.com
>>>> http://www.tess-inc.comhttp://www.trnsys.com
>>>>
>>>>
>>>>
>>>> ---------- 已转发邮件 ----------
>>>> From: "Marion Hiller" <hiller at transsolar.com>
>>>> To: trnsys-users <trnsys-users at cae.wisc.edu>
>>>> Date: Thu, 14 Apr 2011 08:14:43 +0200
>>>> Subject: Re: [TRNSYS-users] TRNSYS3D plugin question
>>>>
>>>>   Dear Lampros,
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> When I saved and reopen the idf file, Outiner window showed 17 shading
>>>> objects (!) see attached idf file. Even though I believe that it
>>>> automatically created one object per surface, it is important to know
>>>>
>>>> 1.       Is this normal?
>>>>
>>>> => Yes this is normal. Thr pluginallows you to draw several shading
>>>> surfaces into one group because it is more convienent than creating a group
>>>> for each surface.
>>>>
>>>> 2.       Does this affect my calculations?
>>>> => Yes, this is the required input and therefore it is working fine J
>>>>
>>>> 3.       Can I do something to make it behave properly?
>>>> => No, this is the proper behavour
>>>>
>>>> 4.       Why does outliner window of my skp,  even though it produces
>>>> errors, shows the shading objects properly?
>>>> => because it’s not an error.
>>>>
>>>>
>>>>
>>>> Best regards,
>>>>
>>>>
>>>>
>>>> Marion
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *Dipl.-Ing. Marion Hiller **
>>>> **TRANSSOLAR: KlimaEngineering - Technologien für energieeffizientes
>>>> Bauen und Nutzerkomfort in Gebäude **
>>>> Munich - New York - Stuttgart + 49.711.67976.0
>>>>
>>>> **Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart
>>>> Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.:
>>>> DE152272639*
>>>>
>>>> *Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
>>>> Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher *
>>>>
>>>>
>>>>
>>>>
>>>>  ------------------------------
>>>>
>>>>
>>>> *Von:* Lampros Karalis [mailto:lkaralis at metal.ntua.gr]
>>>> *Gesendet:* Mittwoch, 13. April 2011 15:23
>>>> *An:* trnsys-users at cae.wisc.edu
>>>> *Cc:* lkaralis at gmail.com
>>>> *Betreff:* [TRNSYS-users] TRNSYS3D plugin question
>>>>
>>>>
>>>>
>>>> Dear All,
>>>>
>>>>
>>>>
>>>> I am working with the latest version of the TRNSYS 3d plugin on windows
>>>> XP and using the trnsys 17.00019 version of the simulation Studio.
>>>>
>>>>
>>>>
>>>> I already have sketched my building and defined the zones in it, as
>>>> described on the manual.
>>>>
>>>> The most common problems I have met so far have to do with some error
>>>> messages when I try to use the skp file. However I read Mr. ‘s Duffy note
>>>> that we should only use the idf file, and therefore I did not worry.
>>>>
>>>>
>>>>
>>>> My main problem begun when I started drawing the shadow objects that
>>>> affect my building.  I did defined the objects as noted on the tutorial
>>>> (version June 2010) and on the Outliner Window I could see two Shading
>>>> Object groups, (one for the nearby building that affect mine and one for a
>>>> second construction that is attached to my building) Please see attached skp
>>>> file.
>>>>
>>>>
>>>>
>>>> When I saved and reopen the idf file, Outiner window showed 17 shading
>>>> objects (!) see attached idf file. Even though I believe that it
>>>> automatically created one object per surface, it is important to know
>>>>
>>>> 5.       Is this normal?
>>>>
>>>> 6.       Does this affect my calculations?
>>>>
>>>> 7.       Can I do something to make it behave properly?
>>>>
>>>> 8.       Why does outliner window of my skp,  even though it produces
>>>> errors, shows the shading objects properly?
>>>>
>>>>
>>>>
>>>> Any help would be most appreciated, specially on questions #1, #2
>>>>
>>>>
>>>>
>>>> Best Regards
>>>>
>>>> Lampros Karalis
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TRNSYS-users mailing list
>>>> TRNSYS-users at cae.wisc.edu
>>>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>>
>>>>
>>>
>>
>> _______________________________________________
>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>> --
>> ***************************
>> David BRADLEY
>> Principal
>> Thermal Energy Systems Specialists, LLC
>> 22 North Carroll Street - suite 370
>> Madison, WI  53703 USA
>>
>> P:+1.608.274.2577
>> F:+1.608.278.1475d.bradley at tess-inc.com
>> http://www.tess-inc.comhttp://www.trnsys.com
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110428/3eb06c56/attachment-0005.htm>


More information about the TRNSYS-users mailing list