[TRNSYS-users] Water-to-Water Thermofrigopump - Type 668

[Augustin CUQ]

If you can send me the PDF it would be perfect. The idea is to regulate the
temperature of some rooms, acting on the electric power and the signal
control of the device. Knowing the parameters of the Type 1221, it will be
easier to know if this Type can help.

Many thanks in advance.

Augustin CUQ

2011/4/11 Matt Duffy <duffy at tess-inc.com>

>
> Dear Augustin,
>
> The only difference is that the data file is normalized, so you can scale
> the rated capacity, flow rate, and power of the device without having to
> create different data files each time. Yes, both components have heating and
> cooling.
>
> I can send you a PDF of the parameters/inputs/outputs when I get back to
> the office on Monday if that would help.
>
>
>
> Best regards,
>
>
>
> Matt Duffy
>
>
> *----- Original Message -----*
> *From:* "Augustin CUQ" <augustin.cuq at gmail.com>
> *Sent:* Thu, April 7, 2011 3:17
> *Subject:* Re: [TRNSYS-users] Water-to-Water Thermofrigopump - Type 668
>
> Thank you for answering.
> I have read the summarised description of the components (in TESS Lib.),
> but to me, apart from the two stages, it seems to be similar to Type 668. Is
> that easier to produce those normalized data files for the user than with
> Type 668. Does the two-stage component accept both Heating and Cooling
> control signal?
> Is it possible to find the detailed description of these components, with
> their inputs and outputs, to know if they match with the use I am expecting?
>
> Kind regards,
>
> Augustin CUQ
>
> 2011/4/6 Matt Duffy <duffy at tess-inc.com>
>
>> Dear Augustin,
>>
>> Yes, there is a better component. Type668 evolved into Type927 (single
>> stage) and Type1221 (two stage). These components have normalized data
>> files, so you can scale the capacity/power accordingly. These components are
>> in the TESS Libraries 17.
>>
>> Best regards,
>>
>> Matt Duffy
>>
>>
>>
>> *----- Original Message -----*
>> *From:* "Augustin CUQ" <augustin.cuq at gmail.com>
>> *Sent:* Tue, April 5, 2011 4:19
>> *Subject:* [TRNSYS-users] Water-to-Water Thermofrigopump - Type 668
>>
>>
>> Hi everyone,
>>
>> I am trying to model a "thermofrigopump", to obtain both cooling and
>> heating gains through a device.
>> After calculating the most important demand between heating and cooling
>> demands, the idea is to generate heat if heating demands is higher (or to
>> cool the fluid in the other case) and to use either the annex cold
>> production or the annex heat production for others uses. So that I need a
>> heat pump system which calculates both heat and cool power.
>> I was thinking to use Type 668 to model that. Is their a better Type to do
>> that and is that relevant?
>>
>> Thank's in advance for helping me, and sorry for the english mistakes..
>>
>> --
>> Augustin CUQ
>> ------------------------------
>>
>> _______________________________________________
>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>
>
> --
> Augustin CUQ
> Elève-Ingénieur en dernière année à l'Ecole des Mines de Nantes,
> Spécialisation en Génie des Systèmes Energétiques
>
> *Tel: 06 72 79 77 98*
>
>


-- 
Augustin CUQ
Elève-Ingénieur en dernière année à l'Ecole des Mines de Nantes,
Spécialisation en Génie des Systèmes Energétiques

*Tel: 06 72 79 77 98*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110414/f544f3dc/attachment-0005.htm>