[TRNSYS-users] Error in automatic heat transfer calculation for surface

[COGNE Benoit (Axima Seitha)]

Dear all,
 
I get the following message:
 
** Fatal Error at time   :         0.000000
    Generated by Unit     :     2
    Generated by Type     :    56
    Message               : Error in automatic heat transfer calculation  for surface   7 or its adjacent surface!: Automatic heat transfer calculation is only allowed on surfaces within a zone.  Please check building input file (.bui)!
 
I presume it is coming from the fact that I changed the position of a zone description (zone Z7_CIRC) manualy in the .bui file.
 
Can some one tell me where is the error and how I can proceed (except re-describing completly the building zones)
 
Thank you for your help

Benoît COGNE 
Développement Efficacité Energétique 
___________________________________________________ 

 

Direction Commerciale 
46 Boulevard de la Prairie au Duc
BP 40119 - 44201 Nantes Cedex 02 
Tel. 02 40 41 00 81
mail: benoit.cogne at aximaseitha-gdfsuez.com
www.aximaseitha-gdfsuez.com

P Pensez à l'environnement avant d'imprimer ce message

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100908/fda0dddd/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3512 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100908/fda0dddd/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Batiment.bui
Type: application/octet-stream
Size: 52243 bytes
Desc: Batiment.bui
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100908/fda0dddd/attachment-0001.obj>
-------------- next part --------------



GDF SUEZ Mail Disclaimer: http://www.gdfsuez.com/disclaimer/disclaimer-fr.html