[TRNSYS-users] Exporting surface data on Trnsys3d

[Rémy Saulnier]

Thank you,
I was using ***.idf file in spite of ***_b17.idf
It works well now.
Best regards.


Le 28/10/2010 09:17, hotline a écrit :
> Hi Rémy,
>
> this sounds like it doesn't find the link between data and surfaces.
> This can have two reasons:
> - the ***_b17.idf has to be used in order to visualize the results.
> There the surfaces have the same surfaceID's as in TRNBUILD
> - the initial value in the Trnsys3d Printer in the simulation Studio are
> not the same as the surfaceID's in TRNBUILD or the ***_b17.idf. These
> initial values are used to generate the link to the surface numbers in
> the 3D geometry.
>
> Christian
>
> TRANSSOLAR Software Team
> hotline at transsolar.com
>
> www.trnsys.de
> Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen
> und Nutzerkomfort in Gebäuden
> Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /
> Amtsgericht Stuttgart - HRB 23347 / USt-IdNr.: 99073/00911
> Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
> Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher
>
> -----Ursprüngliche Nachricht-----
> Von: Rémy Saulnier [mailto:remy_saulnier at holisud.fr]
> Gesendet: Mittwoch, 27. Oktober 2010 15:19
> An: trnsys-users at cae.wisc.edu
> Betreff: [TRNSYS-users] Exporting surface data on Trnsys3d
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101028/7c5a19da/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Signature_mail.bmp
Type: image/bmp
Size: 179078 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101028/7c5a19da/attachment-0001.bin>