<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
  <head>
    <meta content="text/html; charset=ISO-8859-1"
      http-equiv="Content-Type">
  </head>
  <body text="#000000" bgcolor="#ffffff">
    <font face="Calibri">Thank you,<br>
      I was using ***.idf file in spite of ***_b17.idf <br>
      It works well now.<br>
      Best regards.<br>
    </font>
    <div class="moz-signature"><br>
      <img src="cid:part1.09060704.06040207@holisud.fr" border="0"></div>
    <br>
    Le 28/10/2010 09:17, hotline a écrit :
    <blockquote
      cite="mid:H000008700670ff6.1288250225.scalix.transgmbh.local@MHS"
      type="cite">
      <pre wrap="">Hi Rémy,

this sounds like it doesn't find the link between data and surfaces. 
This can have two reasons:
- the ***_b17.idf has to be used in order to visualize the results. 
There the surfaces have the same surfaceID's as in TRNBUILD
- the initial value in the Trnsys3d Printer in the simulation Studio are 
not the same as the surfaceID's in TRNBUILD or the ***_b17.idf. These 
initial values are used to generate the link to the surface numbers in 
the 3D geometry.

Christian
 
TRANSSOLAR Software Team
<a class="moz-txt-link-abbreviated" href="mailto:hotline@transsolar.com">hotline@transsolar.com</a>                                 
 
<a class="moz-txt-link-abbreviated" href="http://www.trnsys.de">www.trnsys.de</a>         
Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen 
und Nutzerkomfort in Gebäuden                                    
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart / 
Amtsgericht Stuttgart - HRB 23347 / USt-IdNr.: 99073/00911        
Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer, 
Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher

-----Ursprüngliche Nachricht-----
Von: Rémy Saulnier [<a class="moz-txt-link-freetext" href="mailto:remy_saulnier@holisud.fr">mailto:remy_saulnier@holisud.fr</a>] 
Gesendet: Mittwoch, 27. Oktober 2010 15:19
An: <a class="moz-txt-link-abbreviated" href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a>
Betreff: [TRNSYS-users] Exporting surface data on Trnsys3d

_______________________________________________
TRNSYS-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a>
<a class="moz-txt-link-freetext" href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a>



</pre>
    </blockquote>
  </body>
</html>