[TRNSYS-users] type 109 with 5 minutes time step

[Dimas Firmanda Al Riza]

I have adjusted it by now, and it works! thanks a lot!
I adjust it like below

<interval> 0.08333   ! Data file time interval between consecutive lines
<firsttime> 0.08333       ! Time corresponding to first data line (hours)

-dimas-


On Mon, Oct 18, 2010 at 3:28 PM, hotline <hotline at transsolar.com> wrote:

>  Dimas,
>
> did you also adjust the "Time corresponding to first data line" ?
>
> <firsttime> 1          ! Time corresponding to first data line (hours)
>  In addition, you need to set the simulation time step to 5 minutes.
>
> Marion
>
>
>
>  ------------------------------
>    *Von:* Dimas Firmanda Al Riza [mailto:dimasfirmanda at gmail.com]
> *Gesendet:* Montag, 18. Oktober 2010 02:33
> *An:* trnsys-users at cae.wisc.edu
> *Betreff:* [TRNSYS-users] type 109 with 5 minutes time step
>
>   Dear all,
>
>  I have 5 minutes time step weather data,
> How to conduct simulation with 5 minutes time step using type 109,
> do I need to change something in the .109 data file?
> I've try to just change the data in .109 file from 1 hour time step with my
> 5 minutes time step data
> but when I run simulation with 5 minutes time step the results become
> weird,
> Thank you very much
>
>  Regards,
>
>  Dimas Firmanda A.
> MSc student
> Mechanical Engineering Department
> Universiti Teknologi PETRONAS
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101018/2aebefdd/attachment-0001.htm>