[TRNSYS-users] Open Master Theses about TRNSYS
王洋
wanghongyang1767 at gmail.com
Tue Oct 5 07:44:19 PDT 2010
Dea all,
In Uni. of Bundeswehr Munich there are Open Master Theses about TRNSYS .
Please check up the link
http://www.unibw.de/eit8_2/aktuelles/diploms/investigation-of-ventilation-control-strategies-based-upon-co2-concentration-modelling-the-thermodynamic-and-flow-situation
and
http://www.unibw.de/eit8_2/aktuelles/diploms/investigation-of-ventilation-control-strategies-based-upon-co2-concentration-verifying-simulation-results-with-measurements
Welcome to join our Team!
Many thanks in advance!
Br.
Wang
2010/10/5 <trnsys-users-request at cae.wisc.edu>
> Send TRNSYS-users mailing list submissions to
> trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
> trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
> trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
> 1. Running Trnsys in batch files (Kerl, Marion (SCR US EXT))
> 2. Re: Running Trnsys in batch files (Timothy McDowell)
> 3. Re: Determination of heat tranfer rate of walls in Type56
> (Matt Duffy)
> 4. Re: TRNSYS 3D and shading (GANAPATHY.IYER at Thermaxindia.com)
> 5. Re: Determination of heat tranfer rate of walls in Type56
> (tommaso.toppi at polimi.it)
>
>
> ---------- 已转发邮件 ----------
> From: "Kerl, Marion (SCR US EXT)" <marion.kerl.ext at siemens.com>
> To: <trnsys-users at cae.wisc.edu>
> Date: Mon, 4 Oct 2010 13:36:35 -0700
> Subject: [TRNSYS-users] Running Trnsys in batch files
>
> Hi everyone,
>
> This is my first post here in this list. I want to couple BCVTB with
> TRNSYS. So, I have two questions regarding the topic to run TRNSYS in
> batch files.
>
> 1. Is it possible to run a dck-file from TRNSYS with parameters?With a command like this: "C:\Trnsys16_1\Exe\TRNExe.exe"
> "C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n 150 200 300
> Assumed the model in TRNSYS requires start values.
>
>
> 2. Furthermore I tried to run the example from the manual. But every
> time when I run the example "C:\Trnsys16_1\Exe\TRNExe.exe"
> "C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n
> I will get an error message:
>
> ---------------------------
>
> TRNEXE: TRNExe.exe - Unable To Locate Component
>
> ---------------------------
>
> This application has failed to start because libmx.dll was not
> found. Re-installing the application may fix this problem.
>
> ---------------------------
>
> OK
>
> ---------------------------
>
> I don’t understand this message, because the libmx.dll is already in
> C:\TRNSYS16_1\UserLib\DebugDLLs and
> C:\TRNSYS16_1\UserLib\ReleaseDLLs and C:\TRNSYS16_1\UserLib. What’s
> wrong??
>
> Thank you very much in advance.
>
> Marion
>
>
> ---------- 已转发邮件 ----------
> From: "Timothy McDowell" <mcdowell at tess-inc.com>
> To: "Kerl, Marion (SCR US EXT)" <marion.kerl.ext at siemens.com>,
> trnsys-users at cae.wisc.edu
> Date: Mon, 4 Oct 2010 15:45:44 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Running Trnsys in batch files
> Marion -
>
> I have just completed a Type for TRNSYS version 17 that will allow TRNSYS
> to be used in BCVTB. It is still a beta version, but let me know if you
> would like to test it out.
>
> I do not quite understand your questions - are you trying to run directly
> from the command line in windows or are you trying to execute TRNSYS from
> BCVTB?
>
> Regards,
>
> Tim
>
>
>
>
>
> ----------------------------------
> Timothy McDowell
> Executive Vice President
> Thermal Energy System Specialists, LLC
> 22 N. Carroll St, Suite 370
> Madison, WI 53703
> Phone: 608-274-2577
> Fax: 608-278-1475
>
> ----- Original Message -----
> From: "Kerl, Marion (SCR US EXT)" <marion.kerl.ext at siemens.com>
> Sent: Mon, October 4, 2010 15:36
> Subject:[TRNSYS-users] Running Trnsys in batch files
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi everyone,
>
> This is my first post here in this list. I want to couple BCVTB with
> TRNSYS. So, I have two questions regarding the topic to run TRNSYS in
> batch files.
>
> 1. Is it possible to run a dck-file from TRNSYS with parameters?
> With a command like this: "C:\Trnsys16_1\Exe\TRNExe.exe"
> "C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n 150 200 300
> Assumed the model in TRNSYS requires start values.
>
>
>
> 2. Furthermore I tried to run the example from the manual. But every
> time when I run the example "C:\Trnsys16_1\Exe\TRNExe.exe"
> "C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n
> I will get an error message:
>
>
>
> ---------------------------
>
> TRNEXE: TRNExe.exe - Unable To Locate Component
>
> ---------------------------
>
> This application has failed to start because libmx.dll was not found.
> Re-installing the application may fix this problem.
>
> ---------------------------
>
> OK
>
> ---------------------------
>
> I don’t understand this message, because the libmx.dll is already in
> C:\TRNSYS16_1\UserLib\DebugDLLs and C:\TRNSYS16_1\UserLib\ReleaseDLLs and
> C:\TRNSYS16_1\UserLib. What’s wrong??
>
>
>
> Thank you very much in advance.
>
> Marion
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
> ----- End of original message -----
>
>
>
>
> ---------- 已转发邮件 ----------
> From: Matt Duffy <duffy at tess-inc.com>
> To: "a8304506 at graduate.hku.hk" <a8304506 at graduate.hku.hk>
> Date: Mon, 4 Oct 2010 16:55:25 -0500
> Subject: Re: [TRNSYS-users] Determination of heat tranfer rate of walls in
> Type56
> Did you try QCOMO or the QCOMI NType outputs yet?
>
> Best regards
>
> Matt Duffy
> Thermal Energy Systems Specialists
>
>
> Sent from my mobile wireless device. Please excuse any typos.
>
> On Oct 4, 2010, at 6:56 AM, a8304506 at graduate.hku.hk wrote:
>
> > Hello, everyone.
> >
> > I want to calculate the heat transfer rate through particular walls in
> Type56.
> > I have tried to output the NTYPE82 (wall gain) but the value is always
> zero.
> > Can anyone advise which other output should I use? Thank you!
> >
> > Best Regards
> > LEE, Chun Kwong
> > Division of Building Science and Technology
> > City University of Hong Kong
> >
> >
> >
> >
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users at cae.wisc.edu
> > https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
>
>
> ---------- 已转发邮件 ----------
> From: GANAPATHY.IYER at Thermaxindia.com
> To: mesude bayrakci <mesudebayrakci at gmail.com>
> Date: Tue, 5 Oct 2010 10:47:57 +0530
> Subject: Re: [TRNSYS-users] TRNSYS 3D and shading
>
>
> Dear Mesude,
> Click on escape key two times. Your focus in on the old zone, release the
> focus by pressing escape
>
>
>
>
> *mesude bayrakci <mesudebayrakci at gmail.com>*
>
> 10/04/2010 09:01 PM
> To
> TRNSYS-users at cae.wisc.edu
> cc
> Subject
> [TRNSYS-users] TRNSYS 3D and shading
>
>
>
>
> Hello,
>
> I tried to create a new shading group tool after I created new
> zone.However, an error showed up and said
>
> " Zone should be added at the top level of a SketchUp model"
>
> I tried to do that in difference places, always it says the same error.
>
> Any idea?
>
> Thank you._______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
> ================================================================================================================
> DISCLAIMER :
> The information in this email is confidential and may be legally
> privileged.It is intended solely for the addressee. Access to this email by
> anyone else is unauthorized.If you are not the intended recipient, any
> disclosure, copying, distribution or any action taken or omitted to be taken
> in reliance on it, is prohibited and may be unlawful. When addressed to our
> clients any opinions or advice contained in this email are subject to the
> terms and conditions.
>
>
>
> ---------- 已转发邮件 ----------
> From: tommaso.toppi at polimi.it
> To: Matt Duffy <duffy at tess-inc.com>
> Date: Tue, 05 Oct 2010 09:42:54 +0200
> Subject: Re: [TRNSYS-users] Determination of heat tranfer rate of walls in
> Type56
> I'm trying to obtain the heat transfer coefficient, so the problem is
> similar.
> I tried with QCOMI for a surface and dividing it by the temperature
> difference between the surface and the star node, but I found non-physical
> results.
>
> Is there any heat flux I have to subtract to QCOMI before?
> What about QABSI? (QCOMI - QABSI) shouldn't be the convective heat flux?
>
> Thank you
>
> Tommaso Toppi
>
> Def. Quota Matt Duffy <duffy at tess-inc.com>:
>
> Did you try QCOMO or the QCOMI NType outputs yet?
>>
>> Best regards
>>
>> Matt Duffy
>> Thermal Energy Systems Specialists
>>
>>
>> Sent from my mobile wireless device. Please excuse any typos.
>>
>> On Oct 4, 2010, at 6:56 AM, a8304506 at graduate.hku.hk wrote:
>>
>> Hello, everyone.
>>>
>>> I want to calculate the heat transfer rate through particular walls in
>>> Type56.
>>> I have tried to output the NTYPE82 (wall gain) but the value is always
>>> zero.
>>> Can anyone advise which other output should I use? Thank you!
>>>
>>> Best Regards
>>> LEE, Chun Kwong
>>> Division of Building Science and Technology
>>> City University of Hong Kong
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at cae.wisc.edu
>>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>
>>
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101005/d06ad465/attachment-0001.htm>
More information about the TRNSYS-users
mailing list