<div>Dea all,<br> <br>In Uni. of Bundeswehr Munich there are Open Master Theses about TRNSYS . Please check up the link <br><a href="http://www.unibw.de/eit8_2/aktuelles/diploms/investigation-of-ventilation-control-strategies-based-upon-co2-concentration-modelling-the-thermodynamic-and-flow-situation">http://www.unibw.de/eit8_2/aktuelles/diploms/investigation-of-ventilation-control-strategies-based-upon-co2-concentration-modelling-the-thermodynamic-and-flow-situation</a> <br>
and<br><a href="http://www.unibw.de/eit8_2/aktuelles/diploms/investigation-of-ventilation-control-strategies-based-upon-co2-concentration-verifying-simulation-results-with-measurements">http://www.unibw.de/eit8_2/aktuelles/diploms/investigation-of-ventilation-control-strategies-based-upon-co2-concentration-verifying-simulation-results-with-measurements</a><br>
<br>Welcome to join our Team!<br> <br> Many thanks in advance!<br> <br>Br.<br> <br>Wang</div>
<div><br><br> </div>
<div class="gmail_quote">2010/10/5 <span dir="ltr"><<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a>></span><br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;" class="gmail_quote">Send TRNSYS-users mailing list submissions to<br> <a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
<br>To subscribe or unsubscribe via the World Wide Web, visit<br> <a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
or, via email, send a message with subject or body 'help' to<br> <a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a><br><br>You can reach the person managing the list at<br>
<a href="mailto:trnsys-users-owner@cae.wisc.edu" target="_blank">trnsys-users-owner@cae.wisc.edu</a><br><br>When replying, please edit your Subject line so it is more specific<br>than "Re: Contents of TRNSYS-users digest..."<br>
<br>Today's Topics:<br><br> 1. Running Trnsys in batch files (Kerl, Marion (SCR US EXT))<br> 2. Re: Running Trnsys in batch files (Timothy McDowell)<br> 3. Re: Determination of heat tranfer rate of walls in Type56<br>
(Matt Duffy)<br> 4. Re: TRNSYS 3D and shading (GANAPATHY.IYER@Thermaxindia.com)<br> 5. Re: Determination of heat tranfer rate of walls in Type56<br> (<a href="mailto:tommaso.toppi@polimi.it" target="_blank">tommaso.toppi@polimi.it</a>)<br>
<br><br>---------- 已转发邮件 ----------<br>From: "Kerl, Marion (SCR US EXT)" <<a href="mailto:marion.kerl.ext@siemens.com" target="_blank">marion.kerl.ext@siemens.com</a>><br>To: <<a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a>><br>
Date: Mon, 4 Oct 2010 13:36:35 -0700<br>Subject: [TRNSYS-users] Running Trnsys in batch files<br>
<div>
<p dir="ltr"><span lang="en-us"><font face="Calibri">Hi everyone,</font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">This is my first post here in this list. I want to couple BCVTB with TRNSYS.</font></span><span lang="en-us"> <font face="Calibri">So,</font></span><span lang="en-us"> <font face="Calibri">I</font></span><span lang="en-us"><font face="Calibri"> have two questions regarding the topic to run TRNSYS in batch files</font></span><span lang="en-us"><font face="Calibri">. </font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">1. </font></span><span lang="en-us"></span><span lang="en-us"></span><span lang="en-us"></span><span lang="en-us"> <font face="Calibri">Is</font></span><span lang="en-us"><font face="Calibri"> it possible to</font></span><span lang="en-us"> <font face="Calibri">run a dck-file from TRNSYS with parameters?</font></span><span lang="en-us"><font face="Calibri"> With a command like this:</font></span><span lang="en-us"> <font face="Calibri">"C:\Trnsys16_1\Exe\TRNExe.exe" "C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n</font></span><span lang="en-us"><font face="Calibri"> 150 200 300</font></span><span lang="en-us"><br>
<font face="Calibri">Assumed the</font></span><span lang="en-us"> <font face="Calibri">model</font></span><span lang="en-us"><font face="Calibri"> in TRNSYS requires start values.</font></span></p>
<ul dir="ltr">
<ul dir="ltr">
<p dir="ltr"><span lang="en-us"></span></p></ul></ul>
<p dir="ltr"><span lang="en-us"><font face="Calibri">2. </font></span><span lang="en-us"> <font face="Calibri">Furthermore</font></span><span lang="en-us"> <font face="Calibri">I tried to run the example from the manual</font></span><span lang="en-us"><font face="Calibri">. But every time when</font></span><span lang="en-us"> <font face="Calibri">I</font></span><span lang="en-us"><font face="Calibri"></font></span><span lang="en-us"> <font face="Calibri">run the example</font></span><span lang="en-us"> <font face="Calibri">"C:\Trnsys16_1\Exe\TRNExe.exe" "C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n</font></span><span lang="en-us"><font face="Calibri"><br>
</font></span><span lang="en-us"><font face="Calibri">I</font></span><span lang="en-us"><font face="Calibri"> will get an error message:</font></span><span lang="en-us"></span></p>
<ul dir="ltr">
<ul dir="ltr">
<p dir="ltr"><span lang="en-us"></span></p>
<ul dir="ltr">
<ul dir="ltr">
<p dir="ltr"><span lang="en-us"></span><span lang="en-us"><font face="Calibri">---------------------------</font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">TRNEXE: TRNExe.exe - Unable To Locate Component</font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">---------------------------</font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">This application has failed to start because libmx.dll was not found. Re-installing the application may fix this problem. </font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">---------------------------</font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">OK </font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">---------------------------</font></span></p></ul></ul>
<p dir="ltr"><span lang="en-us"><font face="Calibri">I don</font></span><span lang="en-us"><font face="Calibri">’</font></span><span lang="en-us"><font face="Calibri">t understand this message, because the libmx.dll is</font></span><span lang="en-us"> <font face="Calibri">already</font></span><span lang="en-us"><font face="Calibri"> in</font></span><span lang="en-us"> <font face="Calibri">C:\TRNSYS16_1\UserLib\DebugDLLs</font></span><span lang="en-us"><font face="Calibri"> and</font></span><span lang="en-us"> <font face="Calibri">C:\TRNSYS16_1\UserLib\ReleaseDLLs</font></span><span lang="en-us"><font face="Calibri"> and</font></span><span lang="en-us"> <font face="Calibri">C:\TRNSYS16_1\UserLib</font></span><span lang="en-us"><font face="Calibri">. What</font></span><span lang="en-us"><font face="Calibri">’</font></span><span lang="en-us"><font face="Calibri">s w</font></span><span lang="en-us"><font face="Calibri">rong??</font></span><span lang="en-us"></span></p>
</ul></ul>
<p dir="ltr"><span lang="en-us"></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">Thank you very much in advance.</font></span></p>
<p dir="ltr"><span lang="en-us"><font face="Calibri">Marion</font></span><span lang="en-us"></span></p></div><br><br>---------- 已转发邮件 ----------<br>From: "Timothy McDowell" <<a href="mailto:mcdowell@tess-inc.com" target="_blank">mcdowell@tess-inc.com</a>><br>
To: "Kerl, Marion (SCR US EXT)" <<a href="mailto:marion.kerl.ext@siemens.com" target="_blank">marion.kerl.ext@siemens.com</a>>, <a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
Date: Mon, 4 Oct 2010 15:45:44 -0500 (CDT)<br>
Subject: Re: [TRNSYS-users] Running Trnsys in batch files<br>Marion -<br><br>I have just completed a Type for TRNSYS version 17 that will allow TRNSYS<br>to be used in BCVTB. It is still a beta version, but let me know if you<br>
would like to test it out.<br><br>I do not quite understand your questions - are you trying to run directly<br>from the command line in windows or are you trying to execute TRNSYS from<br>BCVTB?<br><br>Regards,<br><br>Tim<br>
<br><br><br><br><br>----------------------------------<br>Timothy McDowell<br>Executive Vice President<br>Thermal Energy System Specialists, LLC<br>22 N. Carroll St, Suite 370<br>Madison, WI 53703<br>Phone: 608-274-2577<br>
Fax: 608-278-1475<br><br>----- Original Message -----<br>From: "Kerl, Marion (SCR US EXT)" <<a href="mailto:marion.kerl.ext@siemens.com" target="_blank">marion.kerl.ext@siemens.com</a>><br>Sent: Mon, October 4, 2010 15:36<br>
Subject:[TRNSYS-users] Running Trnsys in batch files<br><br><br><br><br><br><br><br><br><br><br><br><br><br>Hi everyone,<br><br>This is my first post here in this list. I want to couple BCVTB with<br>TRNSYS. So, I have two questions regarding the topic to run TRNSYS in<br>
batch files.<br><br>1. Is it possible to run a dck-file from TRNSYS with parameters?<br>With a command like this: "C:\Trnsys16_1\Exe\TRNExe.exe"<br>"C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n 150 200 300<br>
Assumed the model in TRNSYS requires start values.<br><br><br><br>2. Furthermore I tried to run the example from the manual. But every<br>time when I run the example "C:\Trnsys16_1\Exe\TRNExe.exe"<br>"C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n<br>
I will get an error message:<br><br><br><br>---------------------------<br><br>TRNEXE: TRNExe.exe - Unable To Locate Component<br><br>---------------------------<br><br>This application has failed to start because libmx.dll was not found.<br>
Re-installing the application may fix this problem.<br><br>---------------------------<br><br>OK<br><br>---------------------------<br><br>I don’t understand this message, because the libmx.dll is already in<br>C:\TRNSYS16_1\UserLib\DebugDLLs and C:\TRNSYS16_1\UserLib\ReleaseDLLs and<br>
C:\TRNSYS16_1\UserLib. What’s wrong??<br><br><br><br>Thank you very much in advance.<br><br>Marion<br><br><br><br>_______________________________________________<br>TRNSYS-users mailing list<br><a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
<a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br><br><br>----- End of original message -----<br><br><br><br><br>---------- 已转发邮件 ----------<br>
From: Matt Duffy <<a href="mailto:duffy@tess-inc.com" target="_blank">duffy@tess-inc.com</a>><br>To: "<a href="mailto:a8304506@graduate.hku.hk" target="_blank">a8304506@graduate.hku.hk</a>" <<a href="mailto:a8304506@graduate.hku.hk" target="_blank">a8304506@graduate.hku.hk</a>><br>
Date: Mon, 4 Oct 2010 16:55:25 -0500<br>Subject: Re: [TRNSYS-users] Determination of heat tranfer rate of walls in Type56<br>Did you try QCOMO or the QCOMI NType outputs yet?<br><br>Best regards<br><br>Matt Duffy<br>Thermal Energy Systems Specialists<br>
<br><br>Sent from my mobile wireless device. Please excuse any typos.<br><br>On Oct 4, 2010, at 6:56 AM, <a href="mailto:a8304506@graduate.hku.hk" target="_blank">a8304506@graduate.hku.hk</a> wrote:<br><br>> Hello, everyone.<br>
><br>
> I want to calculate the heat transfer rate through particular walls in Type56.<br>> I have tried to output the NTYPE82 (wall gain) but the value is always zero.<br>> Can anyone advise which other output should I use? Thank you!<br>
><br>> Best Regards<br>> LEE, Chun Kwong<br>> Division of Building Science and Technology<br>> City University of Hong Kong<br>><br>><br>><br>><br>> _______________________________________________<br>
> TRNSYS-users mailing list<br>> <a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br>> <a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
<br><br><br><br>---------- 已转发邮件 ----------<br>From: GANAPATHY.IYER@Thermaxindia.com<br>To: mesude bayrakci <<a href="mailto:mesudebayrakci@gmail.com" target="_blank">mesudebayrakci@gmail.com</a>><br>Date: Tue, 5 Oct 2010 10:47:57 +0530<br>
Subject: Re: [TRNSYS-users] TRNSYS 3D and shading<br><br><font face="sans-serif" size="2"><br>Dear Mesude,</font><br><font face="sans-serif" size="2">Click on escape key two times. Your focus in on the old zone, release the focus by pressing escape</font>
<p><font size="3"> </font><br><br><br>
<table width="100%">
<tbody>
<tr valign="top">
<td width="40%"><font face="sans-serif" size="1"><b>mesude bayrakci <<a href="mailto:mesudebayrakci@gmail.com" target="_blank">mesudebayrakci@gmail.com</a>></b></font>
<p><font face="sans-serif" size="1">10/04/2010 09:01 PM</font></p>
</td><td width="59%">
<table width="100%">
<tbody>
<tr valign="top">
<td>
<div align="right"><font face="sans-serif" size="1">To</font></div>
</td><td><font face="sans-serif" size="1"><a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a></font>
</td></tr><tr valign="top">
<td>
<div align="right"><font face="sans-serif" size="1">cc</font></div>
</td><td>
</td></tr><tr valign="top">
<td>
<div align="right"><font face="sans-serif" size="1">Subject</font></div>
</td><td><font face="sans-serif" size="1">[TRNSYS-users] TRNSYS 3D and shading</font></td></tr></tbody></table><br>
<table>
<tbody>
<tr valign="top">
<td>
</td><td></td></tr></tbody></table><br></td>
<td><p></p></td></tr></tbody></table><br><br><br><font size="3">Hello,<br><br>I tried to create a new shading group tool after I created new zone.However, an error showed up and said<br><br>" Zone should be added at the top level of a SketchUp model"<br>
<br>I tried to do that in difference places, always it says the same error.<br><br>Any idea?<br><br>Thank you.</font><font size="2"><tt>_______________________________________________<br>TRNSYS-users mailing list<br><a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
<a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br></tt></font><br>================================================================================================================<br>
DISCLAIMER :<br>The information in this email is confidential and may be legally<br>privileged.It is intended solely for the addressee. Access to this email by anyone else is unauthorized.If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions.<br>
<br></p><br><br>---------- 已转发邮件 ----------<br>From: <a href="mailto:tommaso.toppi@polimi.it" target="_blank">tommaso.toppi@polimi.it</a><br>To: Matt Duffy <<a href="mailto:duffy@tess-inc.com" target="_blank">duffy@tess-inc.com</a>><br>
Date: Tue, 05 Oct 2010 09:42:54 +0200<br>
Subject: Re: [TRNSYS-users] Determination of heat tranfer rate of walls in Type56<br>I'm trying to obtain the heat transfer coefficient, so the problem is similar.<br>I tried with QCOMI for a surface and dividing it by the temperature difference between the surface and the star node, but I found non-physical results.<br>
<br>Is there any heat flux I have to subtract to QCOMI before?<br>What about QABSI? (QCOMI - QABSI) shouldn't be the convective heat flux?<br><br>Thank you<br><br>Tommaso Toppi<br><br>Def. Quota Matt Duffy <<a href="mailto:duffy@tess-inc.com" target="_blank">duffy@tess-inc.com</a>>:<br>
<br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;" class="gmail_quote">Did you try QCOMO or the QCOMI NType outputs yet?<br><br>Best regards<br><br>Matt Duffy<br>
Thermal Energy Systems Specialists<br>
<br><br>Sent from my mobile wireless device. Please excuse any typos.<br><br>On Oct 4, 2010, at 6:56 AM, <a href="mailto:a8304506@graduate.hku.hk" target="_blank">a8304506@graduate.hku.hk</a> wrote:<br><br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;" class="gmail_quote">Hello, everyone.<br><br>I want to calculate the heat transfer rate through particular walls in Type56.<br>
I have tried to output the NTYPE82 (wall gain) but the value is always zero.<br>Can anyone advise which other output should I use? Thank you!<br><br>Best Regards<br>LEE, Chun Kwong<br>Division of Building Science and Technology<br>
City University of Hong Kong<br><br><br><br><br>_______________________________________________<br>TRNSYS-users mailing list<br><a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
<a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
</blockquote><br>_______________________________________________<br>TRNSYS-users mailing list<br><a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br><a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
<br></blockquote><br><br><br>----------------------------------------------------------------<br>This message was sent using IMP, the Internet Messaging Program.<br><br><br><br><br>_______________________________________________<br>
TRNSYS-users mailing list<br><a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br><a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
<br></blockquote></div><br>