[TRNSYS-users] Running Trnsys in batch files

[Kerl, Marion (SCR US EXT)]

Hi everyone,

This is my first post here in this list. I want to couple BCVTB with
TRNSYS. So, I have two questions regarding the topic to run TRNSYS in
batch files.  

1.	Is it possible to run a  dck-file from TRNSYS with parameters?
With a command like this: "C:\Trnsys16_1\Exe\TRNExe.exe"
"C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n  150 200 300
Assumed the model in TRNSYS requires start values.
		
2.	Furthermore I tried to run the example from the manual. But
every time when I run the example "C:\Trnsys16_1\Exe\TRNExe.exe"
"C:\Trnsys16_1\Examples\SDHW\sdhw.dck" /n 
I will get an error message:
		
				---------------------------
				TRNEXE: TRNExe.exe - Unable To Locate
Component
				---------------------------
				This application has failed to start
because libmx.dll was not found. Re-installing the application may fix
this problem. 
				---------------------------
				OK   
				---------------------------
		I don't understand this message, because the libmx.dll
is already in C:\TRNSYS16_1\UserLib\DebugDLLs and
C:\TRNSYS16_1\UserLib\ReleaseDLLs and C:\TRNSYS16_1\UserLib. What's
wrong??


Thank you very much in advance.

Marion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101004/4825cbff/attachment-0001.htm>