[TRNSYS-users] type56

[Angela Dröscher]

Hi,

if I understod your problem correctly, it is rather easy to solve: just divide the walls of the atrium so that they have the same size as the walls of the adjacent zones (in Google SketchUp just draw a line in the wall). Then you can define the adjacent walls.

Best regards
Angela

-- 
Graz University of Technology
Institute of Thermal Engineering
Inffeldgasse 25/B, A-8010 Graz, Austria
Tel.: (+43) 316 873 7804
Fax: (+43) 316 873 7305
http://www.iwt.tugraz.at

Am 18.11.2010 10:57, schrieb 周雯雯:
> dear sir：
> The popurse to write to you is to find out how to create a building which has some especial feature in the real life.
> For example a building has an atrium which is drawn in the attachment. I tried doing it, but failed. I think the mainly reason is that the adjacent wall beetween adjacent rooms must be the same eara. But in an atrium building, the atrium is adjacent to many zones at the same time.so would you like to tell me how to get a building with an atrium using type56?
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users