[TRNSYS-users] PCM Model

[Samar Jaber]

Dear Matthias,

Thank you very much. It's working now.

Best Regards,
Samar



Quoting "Kersken, Matthias" <Matthias.Kersken at ibp.fraunhofer.de>:

> Dear Samer!
>
> "Inside a Zone" means the wall-surface on the inside of a zone.
> You usually get that massage if the automated heat flux calc. is active at
> the outer side of an external wall.
>
> Best regards,
> 	Matthias Kersken
>
>
> ---
>
> Dipl.-Ing. Matthias Kersken
> Wissenschaftlicher Mitarbeiter / Abteilung Energiesysteme
> Fraunhofer-Institut für Bauphysik
> Institutsteil Holzkirchen
> Fraunhoferstraße 10
> 83626 Valley
> eMail: Matthias.Kersken at ibp.fraunhofer.de
> Telefon 08024 / 643-204
> Telefax 08024 / 643-366
> www.ibp.fraunhofer.de
> Dipl.-Ing. Matthias Kersken
> Research Associate / Department Energy Systems
> Fraunhofer Institute for Building Physics
> Branch Holzkirchen
> Fraunhoferstraße 10
> D-83626 Valley
> eMail: Matthias.Kersken at ibp.fraunhofer.de
> Phone +49 8024 / 643-204
> Fax +49 8024 / 643-366
> www.ibp.fraunhofer.de
>
>
>
>
>
>
>
>
>
>
>
>
>
> ---
>
> -----Ursprüngliche Nachricht-----
> Von: Samar Jaber [mailto:samar-jumah-mustafa.jaber at tu-ilmenau.de]
> Gesendet: Samstag, 8. Mai 2010 14:55
> An: Samar Jaber
> Cc: trnsys-users at cae.wisc.edu
> Betreff: Re: [TRNSYS-users] PCM Model
>
> Sorry. I forgot to mention that when I run this file in TRNBuild gives an
> error that "File E/Program does not exist !" even I checked the Exe file and
> its correct (as attached file)
>
> Thank you again
> Samar
>
>
>
> Quoting Samar Jaber <samar-jumah-mustafa.jaber at tu-ilmenau.de>:
>
> > Dear Sir/Madam,
> >
> > According to TRNsys my building file (.bui) doesn't work because it
> > have got "a error in automatic heat transfert calculation for surface
> > 1 or its adjacent surface : automatic heat transfert calculation is
> > only allowed on surfaces within a zone".
> >
> > I don't understand the last sentence because a surface is always
> > descripted in a zone.
> >
> > If somebody met this error and solved it, can I have a replay, please.
> >
> > Best Regards,
> > Samar
> >
> >
> > ----------------------------------------------------------------
> > This message was sent using IMP, the Internet Messaging Program.
> >
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>


----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.