[TRNSYS-users] PCM Model

[Kersken, Matthias]

Dear Samer!

"Inside a Zone" means the wall-surface on the inside of a zone.
You usually get that massage if the automated heat flux calc. is active at
the outer side of an external wall.

Best regards,
	Matthias Kersken


---
 
Dipl.-Ing. Matthias Kersken
Wissenschaftlicher Mitarbeiter / Abteilung Energiesysteme
Fraunhofer-Institut für Bauphysik 
Institutsteil Holzkirchen
Fraunhoferstraße 10
83626 Valley
eMail: Matthias.Kersken at ibp.fraunhofer.de
Telefon 08024 / 643-204
Telefax 08024 / 643-366
www.ibp.fraunhofer.de
Dipl.-Ing. Matthias Kersken
Research Associate / Department Energy Systems 
Fraunhofer Institute for Building Physics 
Branch Holzkirchen
Fraunhoferstraße 10
D-83626 Valley
eMail: Matthias.Kersken at ibp.fraunhofer.de
Phone +49 8024 / 643-204
Fax +49 8024 / 643-366
www.ibp.fraunhofer.de
 
 
 
 
 
 
 
 
 
 
 
 
 
---

-----Ursprüngliche Nachricht-----
Von: Samar Jaber [mailto:samar-jumah-mustafa.jaber at tu-ilmenau.de] 
Gesendet: Samstag, 8. Mai 2010 14:55
An: Samar Jaber
Cc: trnsys-users at cae.wisc.edu
Betreff: Re: [TRNSYS-users] PCM Model

Sorry. I forgot to mention that when I run this file in TRNBuild gives an
error that "File E/Program does not exist !" even I checked the Exe file and
its correct (as attached file)

Thank you again
Samar



Quoting Samar Jaber <samar-jumah-mustafa.jaber at tu-ilmenau.de>:

> Dear Sir/Madam,
>
> According to TRNsys my building file (.bui) doesn't work because it 
> have got "a error in automatic heat transfert calculation for surface 
> 1 or its adjacent surface : automatic heat transfert calculation is 
> only allowed on surfaces within a zone".
>
> I don't understand the last sentence because a surface is always 
> descripted in a zone.
>
> If somebody met this error and solved it, can I have a replay, please.
>
> Best Regards,
> Samar
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>


----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 7103 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100510/6489e22f/attachment-0005.bin>