[TRNSYS-users] TRNSYS-users Digest, Vol 65, Issue 35

[prabhakar vijayaillu]

prabhakar
vijayaillu

Mr Rick

Thanks for your interest. invite your cooperation and support for planning
some of technology upgrades for introducing
evoporative  cooling  in rural sectors  will you forward us a few plans.
thanking you
vijayaillu

2010/5/26 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. Re: Trnsys Massage 4 (Matt Duffy)
>   2. Re: TRNSYS-users Digest, Vol 65,  Issue 32 - Question about
>      cooling air in a semi-open space (Horocholyn, Rick)
>   3. Debuging visual fortran (thiemann.stefan at vdi.de)
>   4. Re: Debuging visual fortran (QiChao Zhu)
>
>
> ---------- Forwarded message ----------
> From: "Matt Duffy" <duffy at tess-inc.com>
> To: "Heike Huber-Fauland" <heike.huber-fauland at tuwien.ac.at>,
> trnsys-users at cae.wisc.edu
> Date: Tue, 25 May 2010 12:40:53 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Trnsys Massage 4
>
> Dear Heike,
>
> It requires a changing the appropriate variable value TRNSYSConstants.for
> and recompiling the TRNDLL, or you could just simply contact your TRNSYS
> distributor and ask them for a new TRNDLL with this change.
>
> Best regards,
>
> Matt Duffy
>
> *----- Original Message -----*
> *From:* "Heike Huber-Fauland" <heike.huber-fauland at tuwien.ac.at>
> *Sent:* Tue, May 25, 2010 6:37
> *Subject:* [TRNSYS-users] Trnsys Massage 4
>
>   Dear all,
>
>
>
> I’ve got the error massage 4 -> reaches the max. number of outputs.
>
> Where or/and  how can I change the max. outputs?
>
>
>
> thanks in advance
>
> Heike
>
>
>
>
>
> Dipl-Ing. Heike Huber-Fauland
>
>
>
> Technische Universität Wien
>
> Institut für Energietechnik und Thermodynamik
>
>
>
> Getreidemarkt 9/302
>
> 1060 Wien
>
> Tel: (+43-1) 58801-30217
>
> Fax: (+43-1) 58801-30299
>
> Email: heike.huber-fauland at tuwien.ac.at
>
> WWW:   http://www.ite.tuwien.ac.at
>
>
>
>
> ------------------------------
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
>
> ---------- Forwarded message ----------
> From: "Horocholyn, Rick" <rhoro at hydro.mb.ca>
> To: <trnsys-users at cae.wisc.edu>
> Date: Tue, 25 May 2010 10:01:04 -0500
> Subject: Re: [TRNSYS-users] TRNSYS-users Digest, Vol 65, Issue 32 -
> Question about cooling air in a semi-open space
> Hi vijayaillu,
>
> Without regard to any specific component/type, evaporative cooling can
> be used to induce reduction in the air temperature.  If the RH of the
> space is low enough, by injecting a mist of water into the air space you
> can effect this temperature reduction.  Since the space is open to the
> environment, you would project the mist into the upstream side of the
> predominant air flow through the space, and you would likely have to do
> this continuously.  Understanding and using a psychrometric chart will
> offer insights.
>
> Regards,
> Rick.
>
>
> -----Original Message-----
> From: trnsys-users-request at cae.wisc.edu
> [mailto:trnsys-users-request at cae.wisc.edu]
> Sent: Saturday, May 22, 2010 12:03 PM
> To: trnsys-users at cae.wisc.edu
> Subject: TRNSYS-users Digest, Vol 65, Issue 32
>
> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of TRNSYS-users digest..."
>
>
>
>
> ---------- Forwarded message ----------
> From: <thiemann.stefan at vdi.de>
> To: <TRNSYS-users at cae.wisc.edu>
> Date: Wed, 26 May 2010 11:10:27 +0200
> Subject: [TRNSYS-users] Debuging visual fortran
> Hi,
>
> I created a dll in Compaq visual fortran 6.6C but it doesnt work as
>  intended. I would like to see the values of the variables while the
>  dll is running.
> I found that this can be done in the debug modus, but I either can
>  make the program stop at breakpoints nor watch the values.
> Does anybody know how to debug a dll?
>
> Many Thanks,
>
> Stefan
>
>
>
>
>
>
> ---------- Forwarded message ----------
> From: "QiChao Zhu" <QiChao.Zhu at sg.panasonic.com>
> To: <thiemann.stefan at vdi.de>, <TRNSYS-users at cae.wisc.edu>
> Date: Wed, 26 May 2010 17:22:37 +0800
> Subject: Re: [TRNSYS-users] Debuging visual fortran
> So far as I know in C++ programming, you have to recompile the calling
> program and called dll library as same time. Then you can debug into dll
> after entering calling program. In your case, I think you may need to
> recompile the TRNSYS kernel and your proposed dll to break into your library
> code. Please correct me if anything wrong.
>
> Email : QiChao.Zhu at sg.panasonic.com
> Tel: (65)6550 5324
>
> -----Original Message-----
> From: thiemann.stefan at vdi.de [mailto:thiemann.stefan at vdi.de]
> Sent: 2010年5月26日 17:10
> To: TRNSYS-users at cae.wisc.edu
> Subject: [TRNSYS-users] Debuging visual fortran
>
> Hi,
>
> I created a dll in Compaq visual fortran 6.6C but it doesnt work as
>  intended. I would like to see the values of the variables while the
>  dll is running.
> I found that this can be done in the debug modus, but I either can
>  make the program stop at breakpoints nor watch the values.
> Does anybody know how to debug a dll?
>
> Many Thanks,
>
> Stefan
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100527/bbbc978f/attachment-0001.htm>