[TRNSYS-users] PID Controller

[LE GALL, Jace]

Dear TRNSys users,

 

I am currently using a PID Controller to modulate the water flow in a
chilling installation. The control signal varies from 0 to 1 accordingly
to the temperature of the air I want to control but it does not have any
impact on the Type647 valve I have used to divert the flow. I therefore
have no regulation at all (waterflow remains constant). Do you know if
there is any incompatibility between these 2 types (no message of
compatibility problem between output and input is shown)?

 

Thank you for your help.

 

Best regards

 

Jace LE GALL

BYME Engineering Hub


--
Les donnees et renseignements contenus dans ce message sont personnels, confidentiels et secrets. Toute publication, utilisation ou diffusion, meme partielle, doit etre autorisee. Si vous n'etes pas le bon destinataire, nous vous demandons de ne pas lire, copier, utiliser ou divulguer cette communication. Nous vous prions de notifier cette erreur a l'expediteur et d'effacer immediatement cette communication de votre systeme.

Any data and information contained in this electronic mail is personal, confidential and secret. Any total or partial publication, use or distribution must be authorized. If you are not the right addressee, we ask you not to read, copy, use or disclose this communication. Please notify this error to the sender and erase at once this communication from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100504/6584ce24/attachment-0001.htm>