[TRNSYS-users] Calling TRNEXE

Thu Mar 11 09:48:11 PST 2010

Thanks Richard and Marcus,

for your quick replay. The second parameter “\n” works fine.

To check the log file should be the easiest way to react on any kind of
thrown exceptions by TRNEXE. I will search for “Fatal Error” string in the
text file.

Thank you very much.

Mit freundlichen Grüßen

Jan Schneider

BBS INGENIEURBÜRO

Am Forst 27

38302 Wolfenbüttel

Tel.:    +49 (0)5331 971725

Fax:    +49 (0)5331 971717

Mobil: +49 (0)179 5260985

www.BBS-INGENIEURBUERO.de <http://www.bbs-ingenieurbuero.de/> 

  _____  

Von: Jones Marcus [mailto:Marcus.Jones at ait.ac.at] 
Gesendet: Donnerstag, 11. März 2010 17:55
An: 'Jan Schneider [BBS INGENIEURBÜRO]'; trnsys-users at engr.wisc.edu
Betreff: RE: [TRNSYS-users] Calling TRNEXE

Type ‘/n’ after your TRNEXE command to remove the end dialog box. 

Best,

Marcus

MARCUS JONES, MSc

Energy Department

Sustainable Building Technologies 

AIT Austrian Institute of Technology 

Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H. 

Giefinggasse 2 | 1210 Vienna | Austria 

T +43(0) 50 550-6387 | M +43(0) 664 210 24 15 | F +43(0) 50550-6598

 <mailto:marcus.jones at ait.ac.at> marcus.jones at ait.ac.at |
http://www.ait.ac.at <http://www.ait.ac.at/>  

FN: 165088b HG Wien | UID: ATU46577208 This email and any attachments
thereto, is intended only for use by the addressee(s) named herein and may
contain legally privileged and/or confidential information. If you are not
the intended recipient, please notify the sender by return e-mail or by
telephone and delete this message from your system and any printout thereof.
Any unauthorized use, reproduction, or dissemination of this message is
strictly prohibited. Please note that e-mails are susceptible to change.
Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H. shall not be
liable for the improper or incomplete transmission of the information
contained in this communication, nor shall it be liable for any delay in its
receipt. 

From: Jan Schneider [BBS INGENIEURBÜRO]
[mailto:j.schneider at bbs-ingenieurbuero.de] 
Sent: March 11, 2010 5:06 PM
To: trnsys-users at engr.wisc.edu
Subject: [TRNSYS-users] Calling TRNEXE

Dear TRNSYS users,

I tried to use the TRNEXE.exe for a parametric analysis. There for I modify
the input file (*.dck) by another application. These application calls
TRNEXE with an additional parameter, the path of the dck file, to open it.
Afterwards the application will modify the input file and call TRNEXE for a
second time.

Cause of the “Calculations completed” screen TRNEXE will not close at the
end of the simulation. Hereby I will get a process and screen for each time
I call TRNEXE.

Is it possible to request the end of the simulation to receive an error or
finish code? How do I close the “Calculations completed” screen
automatically?

I would be grateful for your help.

Best regards 

Jan Schneider

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100311/296366b6/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.gif
Type: image/gif
Size: 88 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100311/296366b6/attachment-0005.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 2272 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100311/296366b6/attachment-0006.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.jpg
Type: image/jpeg
Size: 1013 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100311/296366b6/attachment-0007.jpg>