[TRNSYS-users] Fw: Parametric runs

[Rekiya Suleiman]

----- Forwarded Message ----
From: Rekiya Suleiman <omohu_s at yahoo.com>
To: David Bradley <bradley at tess-inc.com>
Cc: trnsys-user at cae.wisc.edu
Sent: Tue, June 22, 2010 7:41:28 PM
Subject: Re: [TRNSYS-users] Parametric runs




Hi
I am using TRNSYS 16, after generating the input file and I try to run a parametric analysis in TRNEdit, it gives me an error message "Access violation at address 00404038 in module 'TRNEdt.exe'. Read of address 00000B8C". 
Please help, thanks.

Rekiyat Suleiman

 

________________________________
From: David Bradley <bradley at tess-inc.com>
To: Rekiya Suleiman <omohu_s at yahoo.com>
Cc: trnsys-users at cae.wisc.edu
Sent: Tue, June 22, 2010 5:06:31 PM
Subject: Re: [TRNSYS-users] Parametric runs

Rekiya,
 If you are using TRNSYS 16 then there is an overview of using parametric tables in the volume 07: TRNEdit manual (section 7.1.2). If you are using TRNSYS 17, the same information can be found in the volume 06: TRNEdit manual.

 The idea is that you generate your input file in the Simulation Studio and then open and edit it using TRNEdit.
Best,
 David


On 6/21/2010 14:09, Rekiya Suleiman wrote: 
Hi
>I am new to TRNSYS, can anyone put me through from the basics on parametric runs e.g varying parameters such as collector area, mass flow rate and storage tank volume in a solar water heater. 
>Thanks.
>
>Rekiyat
>
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at cae.wisc.edu
>https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>  

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100622/ca93b6a5/attachment-0001.htm>