[TRNSYS-users] Parametric runs

[David Bradley]

Rekiya,
  If you are using TRNSYS 16 then there is an overview of using 
parametric tables in the volume 07: TRNEdit manual (section 7.1.2). If 
you are using TRNSYS 17, the same information can be found in the volume 
06: TRNEdit manual.

  The idea is that you generate your input file in the Simulation Studio 
and then open and edit it using TRNEdit.
Best,
  David


On 6/21/2010 14:09, Rekiya Suleiman wrote:
> Hi
> I am new to TRNSYS, can anyone put me through from the basics on 
> parametric runs e.g varying parameters such as collector area, mass 
> flow rate and storage tank volume in a solar water heater.
> Thanks.
> Rekiyat
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>    

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100622/1deee8ff/attachment-0001.htm>