[TRNSYS-users] Blinds

leen peeters l.f.r.peeters at gmail.com
Tue Jun 22 07:49:18 PDT 2010


Julie.

also your convective heat transfer along the window will decrease .... You
might find values for that in the literature. Maybe check the ASHRRAE study
on that.

Leen Peeters

On Tue, Jun 22, 2010 at 9:18 AM, Adrien JEZEQUEL - ITF
<a.jezequel at itf.biz>wrote:

> Dear Julie,
>
> I suggest you to put an equation tool outside of Type56. In that equation
> tool, ESHAD (the ratio of non transparent area of the shading device to
> the whole glazing area, as defined in TRNBUILD) will be calculated
> depending on blinds position.
> If you consider that :
>
>    - GWINDOW = solar shading factor of window only, which is constant (60%
>    for example, which means that 60% of solar radiation goes through the
>    window)
>    - FS = solar shading factor of your system Window + Shadings.
>    FS depends on blinds use,
>     - if blinds are used, FS = 0.2 (for example)
>       - if not, FS = GWINDOW
>
> In that way, FS is calculated as the product between :
>
>    - the amount of solar energy which pass through external shading device
>    when they're used => (1-ESHAD)
>     - ESHAD = 0 means no shading
>       - ESHAD = 1 means zero transmission
>    - and window solar shading factor (GWINDOW)
>       - *FS = GWINDOW.(1-ESHAD)*    (1)
>       Regarding (1)* *
>       *ESHAD = (1- FS/GWINDOW**)   *(2)
>
> No you have a relation between ESHAD, FS and Window G-Value :
>
>    - When blinds are up, solar radiation are only blocked by the window
>    solar shading factor => FS = GWINDOW and ESHAD = 0.
>    - When blinds are down, solar radiation are blocked by window *and*external shadings => FS = 0.2 (for the whole system in that example), ESHAD
>    = (1-0.2/0.6) = 0.667 that means that 66.67% non transparent area of
>    the shading device to the whole glazing area)
>    Regarding (1) FS = 0.5*(1-0.0.667) = 0.5*0.4 = 0.2 which is the total
>    shading factor you want.
>
> Best
>  ------------------------------
>    [image: www.itf.biz] <http://www.itf.biz/>
> www.itf.biz Adrien JEZEQUEL
> Simulations Thermiques Dynamiques *ITF*
> 62, Rue du Bolliet
> 73230 St Alban Leysse
> FRANCE
>  Phone :
> Fax :
> Mail:
> +33(0) 479 750 029
> +33(0) 479 852 122
> a.jezequel at itf.biz*Afin de contribuer au respect de l'environnement, merci
> de n'imprimer cet e-mail que si nécessaire
> Please, consider our environmental responsability before printing this
> email
> *
>
> Le 22/06/2010 14:04, Julie Lestrade a écrit :
>
>  Dear TRNSYS users,
>
> I was wondering about blinds in front of windows and how to take them into
> account.
> In my case, they external blinds. They're up at certain time and down at
> other (depending on radiation on the wall, time of day, ...).
>
> Should I take account of them in Type 56 ? on the windows considered with
> 'external shading factor'  (that would be convenient since i can use a
> schedule) ? If yes, I would like to have a total solar factor for the window
> of 0.2 when the blind is down. Does that mean I should put a shading factor
> 0.8 ? or is it more complicated than that ?
>
> Thank you for your answers
>
> Julie
>
>
>
> ---------------------------------------------------------------------------------------
> Orange vous informe que cet e-mail a été contrôlé par l'anti-virus mail.
> Aucun virus connu à ce jour par nos services n'a été détecté.
>
>
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100622/8d56bd13/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2884 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100622/8d56bd13/attachment-0001.jpeg>


More information about the TRNSYS-users mailing list