[TRNSYS-users] shades in openings by type67 and 68

[Laia Cases - iMat]

Hi trnsys users,

how do I manage if in the same facade there are one window(window1) with 
shade by overhang and by shading mash, and another window(window2) 
without overhang and with same shading mask as windiow1? as i 
understand, there is a problem if one use 2 type67 or 2 type68. By the 
other hand, if I use type68 with type34 for window1 and type 67 for 
window2, I get less demand of heating for window1 than for window 2, 
that is not congruent.
I hope it is understanding, any suggestion?

thanks in advance

Laia


-- 
	*Laia Cases*
Unitat de Condicionament Tèrmic
*iMat - Centre Tecnològic de la Construcció
lcases at imat.cat <mailto:lcases at imat.cat>
www.imat.cat <http://www.imat.cat/>*
	Wellington 23  ·   E-08018 Barcelona
T +34 93 553 97 95
F +34 93 553 97 96
Imprimiu aquest document només si és necessari


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100716/59adbd4b/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imat.jpg
Type: image/jpeg
Size: 30755 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100716/59adbd4b/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tecnio.jpg
Type: image/jpeg
Size: 27188 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100716/59adbd4b/attachment-0011.jpg>