[TRNSYS-users] Type 16c_Solar Radiation Processor

[David Bradley]

Laia,
   Type16 calculates the angle of incidence on each of the surfaces that 
you define. If you define a horizontal surface (slope = 0, azimuth = 0) 
then Type16 will calculate the incidence angle on that surface.
Best,
  David

On 7/12/2010 02:20, Laia Cases - iMat wrote:
> Hi trnsys users,
>
> I am using type16c to get diffuse rad from global data radiation. But 
> type56 needs angle of incidence on horitzontal, and I don't know how 
> to get angle of incidence on horitzontal because this type doesn't 
> give it as an output. Does anybody know how I can get it?
>
> Thanks in advance
>
> Laia
>
>
> En/na Matt Duffy ha escrit:
>>
>> Dear Bastien,
>>
>> "Time of last data read" and "Time of next data read" need to be 
>> connected from your external data reader, Type9, to your Type16 
>> radiation processor, respectively. I am not 100% sure why - most 
>> likely a historical or fortran reason, but please make sure to 
>> connect those.
>>
>> Best regards,
>>
>> Matt Duffy
>>
>>
>>
>> *----- Original Message -----*
>> *From:* "Bastien GARBAY" <garbay at enertech.fr>
>> *Sent:* Thu, May 20, 2010 2:36
>> *Subject:* [TRNSYS-users] Type 16c_Solar Radiation Processor
>>
>> Dear all,
>> I would like to estimate the solar radiation on a tilted surface with 
>> Type 16c by choosing Mode 2 (Total radiation surface on a horizontal 
>> surface, ambient temperature and relative humidity datas are known). 
>> These  threes datas were measured with a step time of 10 minutes from 
>> November until Februar. I want to calculate the effective radiation 
>> on a northern and a southern orientation, in order to estimate the 
>> effective solar gains with a step time of 10 minutes.
>> I can't obtain correct results because I think I don't understand the 
>> inputs 4 and 5 of Type 16c. What does "Time of last data read" and 
>> "Time of next data read" mean?
>> Is it possible to use this type with a timestep of 10 minutes but 
>> with measures on only 4 months (not a complete year)?
>> Thanks for your help and your answer!
>> Bastien
>>
>> ------------------------------------------------------------------------
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu  <javascript:bodyCreateMail('TRNSYS-users%40cae.wisc.edu')>
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>    
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>    
>
> -- 
> 	*Laia Cases*
> Unitat de Condicionament Tèrmic
> *iMat - Centre Tecnològic de la Construcció
> lcases at imat.cat <mailto:lcases at imat.cat>
> www.imat.cat <http://www.imat.cat/>*
> 	Wellington 23  ·   E-08018 Barcelona
> T +34 93 553 97 95
> F +34 93 553 97 96
> Imprimiu aquest document només si és necessari
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>    

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100712/96e4b0be/attachment-0005.htm>