[TRNSYS-users] Optimisation.
David Bradley
bradley at tess-inc.com
Wed Jul 7 08:22:49 PDT 2010
Didier,
There is a line in the BUI file:
OUTPUTS
TRANSFER : TIMEBASE=1.000
and while I presume that you could define the timebase using a variable,
I am not sure if there is a way to prevent GenOpt from trying to choose
a value of that variable.
In my experience, while there is a dependence on the time base, when
doing comparison between two possibilities, it is best to choose a
single time base for both of them. Also, for most constructions, a time
base of 1hr is satisfactory.
Best,
David
On 7/7/2010 06:39, gossard at cict.fr wrote:
> Hi all,
>
> I want to find the optimal characteristics (minimising the annual
> energy-consumption) of the massive part of the external wall and study
> the influence of the insulation layer (position or/and nature) on the
> optimal characteristics of the massive part. My variables are the
> conductivity, the capacity and the density of the massive part. I'm
> using GenOpt2 and TRNSYS 16 for that.
> If I understood correctly, the calculations of heat transfer through
> the wall depend on the nature of the wall (if it is heavy or light)
> and so, they depend on the wall time base. But how to adapt this wall
> time base to the nature of each wall ? Is it possible to do it with
> GenOpt commands ?
>
> Please, find enclosed my BUI-file. The external wall I want to
> optimize is called "MUREXT34" (external wall) and I search the optimal
> characteristics of "PARPAING" (massive part).
>
> Best regards,
> Didier Gossard.
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
bradley at tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100707/7621d094/attachment-0005.htm>
More information about the TRNSYS-users
mailing list