[TRNSYS-users] pipe configuration radiant floor

[David Bradley]

Francisco,
  Without the project and the radiant floor data file, it is very 
difficult to guess what the problem might be. I would recommend that you 
contact your distributor and send them the relevant files.
Best,
  David


On 7/26/2010 05:43, Francisco Fernandez wrote:
> Hello
> I have a problem with the radiant floor components. I actually do a 
> project about a comparation of differents radiant floor models. I use 
> Type 712, Type 705, Type 360 and the active layer included in Type 56.
> My problem is when I run with a component that has an external file 
> where the pipe cofiguration is defined. The error is: "The radiant 
> slab model was unable to correctly read the external data file 
> containing the buried pipe configuration.  Please make sure this file 
> is in the correct format,is not open by another application, and is 
> correctly ASSIGNed in the TRNSYS input file and re-run the simulation".
> I would like to know if somebody can help me.
> Thank you
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>    

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100729/d2cc242f/attachment-0001.htm>