[TRNSYS-users] creating a dll

[David Bradley]

Andreas,
   All that is meant by "routines they require" is that perhaps your 
Type calls some other subroutine that you have written. If that is the 
case, then you need to include those extra subroutines in the project.

   If you have the CVF6.6 compiler, I would recommend that you add your 
new Type to the TRNDll workspace and project, rebuild the TRNDll (the 
process is the same as for adding files to an external DLL and 
rebuilding it). Once you have rebuilt the TRNDll in debug mode you can 
put breakpoints in your code and run your simulation from the CVF 
interface (by pressing F5). You can then step through your code one line 
at a time and find out where the integer overflow is occurring.
Best,
  David


On 7/7/2010 05:52, Andreas Klesse wrote:
>
> Hello,
>
> I have a problem creating my own dll with CVF 6.6. As it is written in 
> the programmers guide in chapter 8.5.2.4 you have to add the "routines 
> they require". Where do I find this routines? Does anybody has an idea 
> and can help me. I did this without these routines and my type stops 
> with integer overflow after call -1.
>
> Thanks for your response
>
> Andreas
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>    

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100707/f2282e39/attachment-0001.htm>