[TRNSYS-users] TRNSED file creation - falty source code generated

[lucas.lira at scottish-southern.co.uk]

Dear All,

I'm currently working in the creation of some TRNSED files from some 
energy systems modelled by me. After creating the trd file and trying to 
run the simulation through TRNSEDIT, some systems would do it smoothly, 
some would present some warnings.  An example is shown below:

*** Fatal Error at time   :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    TRNSYS Message     13 : The TRNSYS Processor has reported an error 
while trying to process EQUATIONS. The reported error was that an equal 
sign (=) did not follow the variable name. One common cause of this error 
is to have fewer equations that that specified in the EQUATIONS card. 
Please check the input file and re-run the simulation
    Reported information  : OF

For this specific case I identified that when the trd file was created, 
the list file was being written as bellow:

*
* Model "Type661" (Type 661)
* 
*
*|*
*|* *** Model Type661 (Type 661, Unit 27)
*|*
CONSTANTS 5
*|*PARAMETERS                                   VALUES UNITS
NUMBEROF= 2.0000000000000E+00
*|Number of inputs                        |-|-|0|1|1|50.000|1000
OFTIMEST=1
 of timesteps to hold value-1          |-|-|0|1|0|25.000|1000
INITIALF= 0.0000000000000E+00
*|Initial function value-1 |any|any|0|1|-1000000.00000|1000000.00000|1000
OFTIMES1=1
 of timesteps to hold value-2          |-|-|0|1|0|25.000|1000
INITIAL1= 0.0000000000000E+00
*|Initial function value-2 |any|any|0|1|-1000000.00000|1000000.00000|1000
*
UNIT 27 TYPE 661         Type661
*$UNIT_NAME Type661
*$MODEL .\Controllers Library (TESS)\Delayed Inputs\Type661.tmf
*$POSITION 553 186
*$LAYER Main # 

I put the bit that is causing problem in bold. To solve the issue i just 
had to add "*|" before that line and every thing would work ok. 
Has anyone experienced any similar problem of the trd file being generated 
with incomplete lines? (like missing the *|) Is there any solution to it 
other than manually finding the issue and fixing?

Kind Regards

Lucas Lira

**********************************************************************
The information in this e-mail is confidential and may be legally privileged. It may not represent the views of Scottish and Southern Energy Group. It is intended solely for the addressees. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Any unauthorised recipient should advise the sender immediately of the error in transmission. Unless specifically stated otherwise, this email (or any attachments to it) is not an offer capable of acceptance or acceptance of an offer and it does not form part of a binding contractual agreement. Scottish Hydro Electric, Southern Electric, SWALEC, Atlantic Electric and Gas, S+S and SSE Power Distribution are trading names of the Scottish and Southern Energy Group. 
Scottish and Southern Energy plc, Inveralmond House, 200 Dunkeld Road, Perth, Perthshire, PH1 3AQ. Registered in Scotland Number. 117119
**********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100126/120bdb03/attachment-0005.htm>