<br><font size=2 face="sans-serif">Dear All,</font>
<br>
<br><font size=2 face="sans-serif">I'm currently working in the creation
of some TRNSED files from some energy systems modelled by me. After creating
the trd file and trying to run the simulation through TRNSEDIT, some systems
would do it smoothly, some would present some warnings. An example
is shown below:</font>
<br>
<br><font size=2 face="sans-serif">*** Fatal Error at time :
0.000000</font>
<br><font size=2 face="sans-serif"> Generated by Unit
: Not applicable or not available</font>
<br><font size=2 face="sans-serif"> Generated by Type
: Not applicable or not available</font>
<br><font size=2 face="sans-serif"> TRNSYS Message
13 : The TRNSYS Processor has reported an error while trying to
process EQUATIONS. The reported error was that an equal sign (=) did not
follow the variable name. One common cause of this error is to have fewer
equations that that specified in the EQUATIONS card. Please check the input
file and re-run the simulation</font>
<br><font size=2 face="sans-serif"> Reported information :
OF</font>
<br>
<br><font size=2 face="sans-serif">For this specific case I identified
that when the trd file was created, the list file was being written as
bellow:</font>
<br>
<br><font size=2 color=#008000 face="Courier New">*</font>
<br><font size=2 color=#008000 face="Courier New">* Model "Type661"
(Type 661)</font>
<br><font size=2 color=#008000 face="Courier New">* </font>
<br><font size=2 color=#008000 face="Courier New">*</font>
<br><font size=2 color=blue face="Courier New">*|*</font>
<br><font size=2 color=blue face="Courier New">*|* *** Model Type661 (Type
661, Unit 27)</font>
<br><font size=2 color=blue face="Courier New">*|*</font>
<br><font size=2 face="Courier New">CONSTANTS 5</font>
<br><font size=2 color=blue face="Courier New">*|*PARAMETERS
VALUES
UNITS</font>
<br><font size=2 face="Courier New">NUMBEROF= 2.0000000000000E+00</font>
<br><font size=2 color=blue face="Courier New">*|Number of inputs
|-|-|0|1|1|50.000|1000</font>
<br><font size=2 face="Courier New">OFTIMEST=1</font>
<br><font size=2 face="Courier New"> <b><i>of timesteps to hold value-1
|-|-|0|1|0|25.000|1000</i></b></font>
<br><font size=2 face="Courier New">INITIALF= 0.0000000000000E+00</font>
<br><font size=2 color=blue face="Courier New">*|Initial function value-1
|any|any|0|1|-1000000.00000|1000000.00000|1000</font>
<br><font size=2 face="Courier New">OFTIMES1=1</font>
<br><font size=2 face="Courier New"><b><i> of timesteps to hold value-2
|-|-|0|1|0|25.000|1000</i></b></font>
<br><font size=2 face="Courier New">INITIAL1= 0.0000000000000E+00</font>
<br><font size=2 color=blue face="Courier New">*|Initial function value-2
|any|any|0|1|-1000000.00000|1000000.00000|1000</font>
<br><font size=2 color=#008000 face="Courier New">*</font>
<br><font size=2 face="Courier New">UNIT 27 TYPE 661
Type661</font>
<br><font size=2 color=#008000 face="Courier New">*$UNIT_NAME Type661</font>
<br><font size=2 color=#008000 face="Courier New">*$MODEL .\Controllers
Library (TESS)\Delayed Inputs\Type661.tmf</font>
<br><font size=2 color=#008000 face="Courier New">*$POSITION 553 186</font>
<br><font size=2 color=#008000 face="Courier New">*$LAYER Main # </font>
<br>
<br><font size=2 face="sans-serif">I put the bit that is causing problem
in bold. To solve the issue i just had to add "</font><font size=2 color=blue face="Courier New">*|</font><font size=2 face="sans-serif">"
before that line and every thing would work ok. </font>
<br><font size=2 face="sans-serif">Has anyone experienced any similar problem
of the trd file being generated with incomplete lines? (like missing the
</font><font size=2 color=blue face="Courier New">*|</font><font size=2 face="sans-serif">)
Is there any solution to it other than manually finding the issue and fixing?</font>
<br>
<br><font size=2 face="sans-serif">Kind Regards</font>
<br>
<br><font size=2 face="sans-serif">Lucas Lira</font>
<br>
<br><pre>**********************************************************************
The information in this e-mail is confidential and may be legally privileged. It may not represent the views of Scottish and Southern Energy Group. It is intended solely for the addressees. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Any unauthorised recipient should advise the sender immediately of the error in transmission. Unless specifically stated otherwise, this email (or any attachments to it) is not an offer capable of acceptance or acceptance of an offer and it does not form part of a binding contractual agreement. Scottish Hydro Electric, Southern Electric, SWALEC, Atlantic Electric and Gas, S+S and SSE Power Distribution are trading names of the Scottish and Southern Energy Group.
Scottish and Southern Energy plc, Inveralmond House, 200 Dunkeld Road, Perth, Perthshire, PH1 3AQ. Registered in Scotland Number. 117119
**********************************************************************
</pre>