[TRNSYS-users] (no subject)

[David Bradley]

Sek,
  Type108 is limited to watching a single temperature. You can use 
multiple instances of Type108. There is a component (Type698 in the TESS 
Controls Library) that will watch multiple zones and make multiple 
control decisions (one for each zone that it is watching).
Best,
 David


#SEK JUN-YANG# wrote:
> Dear trnsys users,
>  
> I've simulated a conventional air condition system with 8 
> zones representing the floor area. I've split the 8 zones into 2 
> groups with different areas and attempted to use 2 thermostats, type 
> 108, to control each group to obtain 2 different sets of results. 
> However, when I link the building to type 108, I am only able to link 
> one zone to the monitoring temperature. I would like to find out if it 
> is possible to either seperate the 8 zones into 2 groups and 
> controlled by 2 thermostats, or combine the total zones to be 
> controlled by one thermostat. Any advice would be greatly appreciated
>  
> Best Regards,
> Sek Jun-Yang
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100113/52e58f50/attachment-0001.htm>