[TRNSYS-users] Help TRNSYS

[PERRIER Rémi 226004]

Hi Felix,

 

Unfortunately, without knowing all parameters, inputs, etc ... you will not be able to create the .tmf. And even if you knew them the probability to create a .tmf compatible with your dll is approximately zero...

So the easiest way will be to find the regular .tmf

 

Good luck,

 

Rémi PERRIER

 

 

CEA INES

Laboratoire DTS / LETh

Bâtiment PUMA 3, P112

BP 332 - 50, avenue du Lac Léman - 73377 Le Bourget du Lac  FRANCE

Mobile : +33 (0)6 76 95 91 86

Email : remi.perrier at cea.fr

 

 

________________________________

De : Felix Blank [mailto:felix_blank at gmx.de] 
Envoyé : mercredi 4 août 2010 15:56
À : trnsys-users at engr.wisc.edu
Objet : [TRNSYS-users] Help TRNSYS

 

Hallo,

I am a Student from Berlin and at the moment I am working on my Master´s
thesis.

The purpose of the thesis is to compare three different types of heat
recovery systems.

Therefore I need to use two dll files (SECO.dll and EXTDLL.dll) but
unfortunately the corresponding tmf file is not available.

To use these dlls I did copy them into the following folder:
"Trnsys16\Userlib\ReleasyDlls" - this did not work.

Is it possible to use the dlls without the tmf file?

Is it possible to create my own tmf file to run the dlls? If this would
work, how can I do this?

 

It would be great to hear from you.

 

Felix Blank

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100805/7998e33f/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2236 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100805/7998e33f/attachment-0003.jpg>