[TRNSYS-users] TRNSYS-users Digest, Vol 68, Issue 8

王洋 wanghongyang1767 at gmail.com
Wed Aug 4 07:10:44 PDT 2010


Dear all,

Ihave a question:
The Restaurant Trnflow Example doesn't RUN, it shows "Parameters for Trnflow
are missing", then I checked it, obviously, all the Value of Trnflow is 0.
Why is it like that? Did the TRNSYS Corporation not SET the Value or  the
Parameters are missing after the installtion? Please explain in detail!
thanks!

Br.

wang

2010/8/4 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. Re: TRNSYS-users Digest, Vol 68, Issue 7 (ghetu mariana)
>   2. Re: Virtual window in TRNBUILD (Marion Hiller)
>   3. Re: Internal walls and Trnsys3d (Marion Hiller)
>   4. TRNFlow and COMIS stand-alone version (Marion Hiller)
>
>
> ---------- 已转发邮件 ----------
> From: ghetu mariana <ghetu_mariana at yahoo.co.uk>
> To: trnsys-users at cae.wisc.edu
> Date: Wed, 4 Aug 2010 09:07:03 +0000 (GMT)
> Subject: Re: [TRNSYS-users] TRNSYS-users Digest, Vol 68, Issue 7
>
> Hello,
>
>
> Does anyone know how can I have one iteration per timestep within Type 56?
> I need to insert something like: Tint(INFO(7)=0) = Tint(INFO(7)=1).
>
>  Is there a way to do this without changing the code of Type 56?
>
>
> Thanks for any info.
>
>
> Mariana GHETU
>
>  ------------------------------
> *From:* "trnsys-users-request at cae.wisc.edu" <
> trnsys-users-request at cae.wisc.edu>
> *To:* trnsys-users at cae.wisc.edu
> *Sent:* Wed, 4 August, 2010 7:05:11
> *Subject:* TRNSYS-users Digest, Vol 68, Issue 7
>
> Note: Forwarded message is attached.
>
> Send TRNSYS-users mailing list submissions to
>     trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>     https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>     trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>     trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
> Today's Topics:
>
>   1. TRNSYS solar modeling position posted at NREL (Blair, Nate)
>   2. Re: modify layer library (David Bradley)
>   3. Re: Creation of a New Type and Error message 105
>       (Soteris Kalogirou)
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
>
> ---------- 已转发邮件 ----------
> From: "Marion Hiller" <hiller at transsolar.com>
> To: trnsys-users <trnsys-users at engr.wisc.edu>
> Date: Wed, 4 Aug 2010 11:19:51 +0200
> Subject: Re: [TRNSYS-users] Virtual window in TRNBUILD
>  Dear Marcello,
>
> the window in the TESS lib isn't defined correctly.
> I'm not sure if  TESS released a corrected version of the Library.
> Maenwhile you can use the vitual window of the AMERICAN or GERMAN Library.
> they should worl without a problem.
>
> Marion Hiller
>
>
> Dipl.-Ing. Marion Hiller
> TRANSSOLAR Energietechnik GmbH
> Munich - New York - Stuttgart + 49.711.67976.0
>
> KlimaEngineering- Technologien für energieeffizientes Bauen und
> Nutzerkomfort in Gebäuden
> Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /
> Amtsgericht Stuttgart - HRB 23347 / USt-IdNr.: 99073/00911
> Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
> Dipl.Phys. Stefan Holst
>
>
>  ------------------------------
>    *Von:* Marcello Caciolo [mailto:mcaciolo at hotmail.com]
> *Gesendet:* Freitag, 30. Juli 2010 10:33
> *An:* trnsys-users at engr.wisc.edu
> *Betreff:* [TRNSYS-users] Virtual window in TRNBUILD
>
>  Dear TRNSYS users,
>
> I am trying to model a zone with an opened window in TRNSYS 16. For the
> thermal model, I use the type56 with a window of the type: "Virtual (open or
> nonexistent) Window" (WINID 1) from TESS Library.
>
> Unfortunately, when I start the simulation, I get the following error:
>
> "Une valeur négative ou supérieure à 1 a été trouvé pour l'absorption non
> visuelle W4_front pour la fenêtre no 1 : abs_nonvis = -.0008717874 à l'angle
> = 0"
> (A value negative or greater than 1 was found for nonvisual absorption
> W4_front for Window-ID   1 : abs_nonvis = -.0008717874 at angle = 0)
>
> I see that other people reported this problem in this forum, but I have not
> found any solution.
>
> Do you know how to solve this issue?
>
> Thanks in advance for your attention.
>
> Best regards,
>
> Marcello CACIOLO
>
> --
> --------------------------------------------------------------------------------
>
>
> Marcello CACIOLO
> Ingénieur de Recherche  Centre Energétique et Procédés - Mines ParisTech
> 60, Bd Saint-Michel  75272 Paris Cedex 06 France
> Tél : +33 (0)1 40 51 94 21 Fax : +33 (0)1 40 51 94 49
> E-mail: marcello.caciolo at ensmp.fr
>
> --------------------------------------------------------------------------------
>
>
>
> ---------- 已转发邮件 ----------
> From: "Marion Hiller" <hiller at transsolar.com>
> To: trnsys-users <trnsys-users at cae.wisc.edu>
> Date: Wed, 4 Aug 2010 11:28:06 +0200
> Subject: Re: [TRNSYS-users] Internal walls and Trnsys3d
>  Dear Pablo,
>
> the 3D detailed radiation mode of TRNSYS 17 are restricted to convexe
> zones.
> Therefore no "internal walls" blocking views are allowed to be defined.
>
> You may split your zone into convex several convex zones or increase the
> capacity of the air node.
>
> At the moment we are working on developing and incoorperating improved
> algorithms which can
> handle concave zones.
>
> Marion
>
>  ------------------------------
>    *Von:* Direccion [mailto:direccion at idienergia.es]
> *Gesendet:* Dienstag, 3. August 2010 13:56
> *An:* trnsys-users at cae.wisc.edu
> *Betreff:* [TRNSYS-users] Internal walls and Trnsys3d
>
>   Hello.
>
>
>
> There’s no “internal wall” in “Constructions”  when I try to draw a
> building with Trnsys3d. I can’t add that walls inside Trnbuild 17, because I
> need to use the 3D Model.
>
> ¿Somebody knows how can I model these types of walls and, at the same time,
> model with Trnsys 3D?
>
>
>
> Thanks to all.
>
>
>
> PABLO EGUÍA
>
> Director Técnico
>
> IDi Energia.
>
> C/Padre Ramón María Aller, nº 6, 1ºD
>
> 36201 – VIGO
>
> Pontevedra
>
>
>
> ---------- 已转发邮件 ----------
> From: "Marion Hiller" <hiller at transsolar.com>
> To: trnsys-users <trnsys-users at cae.wisc.edu>
> Date: Wed, 4 Aug 2010 11:46:09 +0200
> Subject: [TRNSYS-users] TRNFlow and COMIS stand-alone version
>  Dear Wang,
>
> TRNFlow is an integrated version of COMIS into Type 56.
> If you want use TRNbuild/TRNFlow you need to define your airflow network
> within TRNBuild.
> Within the Studio create a multizone building project. You don't need a
> COMIS version at all.
>
> For using the stand-alone version of COMIS in TRNSYS, the option create
> "COMIS project" of the Studio can be used.
>
> Marion
>
>  ------------------------------
>    *Von:* 王洋 [mailto:wanghongyang1767 at gmail.com]
> *Gesendet:* Freitag, 30. Juli 2010 18:13
> *An:* trnsys-users at cae.wisc.edu
> *Betreff:* Re: [TRNSYS-users] TRNSYS-users Digest, Vol 67, Issue 68
>
>  hi every one!
>
> I build a COMIS project, but it shows "the full version of COMIS is not
> installed correctly, the demo version be used......." How to make it? I had
> TRNSYS/TRNFLOW.
>
> thans!
>
> wang
>
> 2010/7/29 <trnsys-users-request at cae.wisc.edu>
>
>> Send TRNSYS-users mailing list submissions to
>>        trnsys-users at cae.wisc.edu
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>        https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>> or, via email, send a message with subject or body 'help' to
>>        trnsys-users-request at cae.wisc.edu
>>
>> You can reach the person managing the list at
>>        trnsys-users-owner at cae.wisc.edu
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>>
>> Today's Topics:
>>
>>   1. Re: TRNSYS-users Digest, Vol 67, Issue 65 (Jeff Thornton)
>>
>>
>>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100804/c70148e4/attachment-0001.htm>


More information about the TRNSYS-users mailing list