[TRNSYS-users] (no subject)

[salim mokraoui]

Dear all,

 

As a new user, I need to know how to control the zone temperature of a
multizone bulding (type56) using a type23 PID controller. I defined an input
heating power in trnbuild which would be the output of type 23 (control
signal). The heating setpoint is fixed to 20 °C. The result was not
satisfactory, as the temperature remains lower than the setpoit and does not
oscillate.

 

Thank you

 

Salim MOKRAOUI

Faculté des sciences de Nancy - LERMAB

BP 239

54506 Vandoeuvre.

Tél 03 83 68 48 47 - mél salim.mokraoui at lermab.uhp-nancy.fr

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100429/00afb0be/attachment-0005.htm>