[TRNSYS-users] Error: pane temperature calculation is diverging

[Nikolai Artmann]

Hello

 

I'm getting the following error message:

 

Message               : Zone   2 surface    4 pane temperature
calculation is diverging at time      0.25000TDIF:  NaN         ITPANE:
31 ITCALC:   51

 

*.lst-file in attachment.

 

 

Zone 2 surface 4 is a window (ID number 13112). I used the same window
also in zone 1 without any problems. Only since I copied the zone and
changed some parameters I get this message. If I delete the window from
zone 2, I get the same message for the window in zone 1. If I delete the
zone 2 completely the simulation runs without a problem.

 

Any Ideas?

 

Thanks, Nikolai

 

  

Nikolai Artmann

3-Plan Haustechnik AG, Winterthur
Telefon  052 / 234 70 66
Telefax  052 / 234 70 60
e-Mail: nikolai.artmann at 3-plan.ch <mailto:nikolai.artmann at 3-plan.ch> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100423/b9c5aae9/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TWIST.lst
Type: application/octet-stream
Size: 810477 bytes
Desc: TWIST.lst
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100423/b9c5aae9/attachment-0005.obj>